USB host mode with HSPA Stick.

[Timo Drick]

Hi,

today i tested the host mode of my freerunner gta02.
It works fine but most kernel modules missing to do usefull things.
My usb-bluetooth stick recognized sucessfully so i have 2 hci devices :-)

Ok here my problem. I have a HSPA USB-Stick (MC950D) if i connect it to 
the phone following is detected:

Aug  2 23:31:45 om-gta02 user.info kernel: usb 1-2: new full speed USB 
device using s3c2410-ohci and address 54
Aug  2 23:31:45 om-gta02 user.info kernel: usb 1-2: configuration #1 
chosen from 1 choice
Aug  2 23:31:46 om-gta02 user.notice kernel: SCSI subsystem initialized
Aug  2 23:31:46 om-gta02 user.info kernel: Initializing USB Mass Storage 
driver...
Aug  2 23:31:46 om-gta02 user.info kernel: scsi0 : SCSI emulation for 
USB Mass Storage devices
Aug  2 23:31:46 om-gta02 user.info kernel: usbcore: registered new 
interface driver usb-storage
Aug  2 23:31:46 om-gta02 user.info kernel: USB Mass Storage support 
registered.
Aug  2 23:31:46 om-gta02 user.debug kernel: usb-storage: device found at 54
Aug  2 23:31:46 om-gta02 user.debug kernel: usb-storage: waiting for 
device to settle before scanning
Aug  2 23:31:51 om-gta02 user.debug kernel: usb-storage: device scan 
complete
Aug  2 23:31:51 om-gta02 user.notice kernel: scsi 0:0:0:0: 
CD-ROM            Novatel  Mass Storage     1.00 PQ: 0 ANSI: 2

ok on my desktop i have to eject the scsi device and afterwards the 
stick register a usb-serial adapter automatically.
My problem here is that my openmoko do not make a device for the scsi0. 
And i am not able to eject this.

regards Timo