unsubscribe

Tue Jun 9 09:58:54 CEST 2009

Am Dienstag, den 09-06-2009 um 8:27 schrieb
"devel-request at lists.openmoko.org" :
Send devel mailing list submissions to
devel at lists.openmoko.org

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.openmoko.org/mailman/listinfo/devel
or, via email, send a message with subject or body 'help' to
devel-request at lists.openmoko.org

You can reach the person managing the list at
devel-owner at lists.openmoko.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of devel digest..."

Today's Topics:

1. Serial port not working on GTA02 with debug board
(Abhishek Bajpai)
2. Re: Serial port not working on GTA02 with debug board
(Timo Juhani Lindfors)
3. Re: OM translation (Evgeniy Ginzburg)
4. Fwd: Serial port not working on GTA02 with debug board
(Abhishek Bajpai)
5. Re: Serial port not working on GTA02 with debug board
(Abhishek Bajpai)
6. Re: Serial port not working on GTA02 with debug board
(Timo Juhani Lindfors)
7. Re: Serial port not working on GTA02 with debug board
(Abhishek Bajpai)
8. Re: Serial port not working on GTA02 with debug board
(Timo Juhani Lindfors)

----------------------------------------------------------------------

Message: 1
Date: Mon, 8 Jun 2009 18:07:22 +0530
From: Abhishek Bajpai 
Subject: Serial port not working on GTA02 with debug board
To: devel at lists.openmoko.org
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

I want to interface a computers serial port with GTA02 . I connected
debug
Board V3 with GTA02 and to my computer.
I set the baud rate to 112500 8N1 of the ttyUSB0 device through
minicom. I
installed the minicom on GTA02 also and set its ports accordingly.
But On my
computer I am getting some special characters in minicom terminal and
no
response in minicom terminal on GTA02. I tried all the serial ports
available on GTA02 ( tty0, tty1, tty2, ttySAC0, ttySAC1, ttySAC2 )
But I am
not getting any response. If the port is aquired by some other
program the
minicom should give the error. but it also not giving any error.

Other thing is I have also observed that minicom terminal on computer
starts
responding as soon as I start the GTA02 device. Does it suggest that
some
other device is also attached in that port.

Please help
Thanks and regards
Abhishek Bajpai

-- 
" Even The word Impossible says I M Possible"
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.openmoko.org/pipermail/devel/attachments/20090608/43041368/attachment-0001.htm

------------------------------

Message: 2
Date: Mon, 08 Jun 2009 15:48:35 +0300
From: Timo Juhani Lindfors 
Subject: Re: Serial port not working on GTA02 with debug board
To: Abhishek Bajpai 
Cc: devel at lists.openmoko.org
Message-ID: 
Content-Type: text/plain; charset=us-ascii

Abhishek Bajpai  writes:
> Other thing is I have also observed that minicom terminal on
computer starts
> responding as soon as I start the GTA02 device. Does it suggest
that some
> other device is also attached in that port.

What's your kernel command line on gta02? Does ps axuf show getty for
ttySAC2?

------------------------------

Message: 3
Date: Mon, 8 Jun 2009 16:58:37 +0400
From: Evgeniy Ginzburg 
Subject: Re: OM translation
To: devel at lists.openmoko.org
Message-ID:

Content-Type: text/plain; charset="utf-8"

On Sun, Jun 7, 2009 at 1:17 AM, Onen  wrote:

> Hi,
>
> thanks for proposing your help.
>
> openBmap (GPS/GSM cell logger), is currently only running in
English. I
> would love to see it translated. Right now, the first step would be
to
> modify the python code to use gettext. Then it would simply be a
matter
> of translating strings.
>
> Let me know if you are interested in any of these.
>
> If this was not the kind of apps you had in mind, then sorry for
the
> noise ;-)
>
> Onen

Hi, Onen.

Just add gettext support, and post link to sourcecode.
There some translators in communoty willing to contribute, myself
included.

Regards, Evgeniy.

-- 
So long, and thanks for all the fish.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.openmoko.org/pipermail/devel/attachments/20090608/fbd85914/attachment-0001.htm

------------------------------

Message: 4
Date: Mon, 8 Jun 2009 20:37:18 +0530
From: Abhishek Bajpai 
Subject: Fwd: Serial port not working on GTA02 with debug board
To: devel at lists.openmoko.org
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

---------- Forwarded message ----------
From: Abhishek Bajpai 
Date: 2009/6/8
Subject: Re: Serial port not working on GTA02 with debug board
To: Timo Juhani Lindfors 

2009/6/8 Timo Juhani Lindfors 

> Abhishek Bajpai  writes:
> > Other thing is I have also observed that minicom terminal on
computer
> starts
> > responding as soon as I start the GTA02 device. Does it suggest
that
> some
> > other device is also attached in that port.
>
> What's your kernel command line on gta02? Does ps axuf show getty
for
> ttySAC2?
> I am using ssh for command line. Yes it shows getty for ttySAC2.
But now I
> have disabled the getty program by moving it to another folder. Now
also I
> am getting the same problem......
>

-- 
" Even The word Impossible says I M Possible"

-- 
" Even The word Impossible says I M Possible"
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.openmoko.org/pipermail/devel/attachments/20090608/e427b932/attachment-0001.htm

------------------------------

Message: 5
Date: Tue, 9 Jun 2009 11:23:29 +0530
From: Abhishek Bajpai 
Subject: Re: Serial port not working on GTA02 with debug board
To: Timo Juhani Lindfors 
Cc: devel at lists.openmoko.org
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

2009/6/8 Abhishek Bajpai 

>
>
> 2009/6/8 Timo Juhani Lindfors 
>
>> Abhishek Bajpai  writes:
>> > Other thing is I have also observed that minicom terminal on
computer
>> starts
>> > responding as soon as I start the GTA02 device. Does it suggest
that
>> some
>> > other device is also attached in that port.
>>
>> What's your kernel command line on gta02? Does ps axuf show getty
for
>> ttySAC2?
>> I am using ssh for command line. Yes it shows getty for ttySAC2.
But now I
>> have disabled the getty program by moving it to another folder.
Now also I
>> am getting the same problem......
>>
> Thanks Timo I desabled getty by moving it to another folder. And
now I am
> able to get characters on GTA02 minicom from computers minicom.
>
but now I am facing new problem :(
while typing on computers minicom I am getting special characters in
response on computers minicom but while typing on GTA02 minicom I am
not
getting any response on computers minicom.
I think it become littile confusing let me explain through a diagram

input from computer>minicom -----> getting response on GTA02>minicom
------>getting special characters on computer>minicom

input from GTA02>minicom -----> not getting any response on
computer>minicom

>
>
> --
> " Even The word Impossible says I M Possible"
>

-- 
" Even The word Impossible says I M Possible"
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.openmoko.org/pipermail/devel/attachments/20090609/867ffcfb/attachment-0001.htm

------------------------------

Message: 6
Date: Tue, 09 Jun 2009 09:07:06 +0300
From: Timo Juhani Lindfors 
Subject: Re: Serial port not working on GTA02 with debug board
To: Abhishek Bajpai 
Cc: devel at lists.openmoko.org
Message-ID: 
Content-Type: text/plain; charset=us-ascii

Abhishek Bajpai  writes:
> while typing on computers minicom I am getting special characters
in
> response on computers minicom but while typing on GTA02 minicom I
am not

Sounds like wrong baudrate. Please first make sure you can talk with
getty.

------------------------------

Message: 7
Date: Tue, 9 Jun 2009 11:47:43 +0530
From: Abhishek Bajpai 
Subject: Re: Serial port not working on GTA02 with debug board
To: Timo Juhani Lindfors 
Cc: devel at lists.openmoko.org
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

2009/6/9 Timo Juhani Lindfors 

> Abhishek Bajpai  writes:
> > while typing on computers minicom I am getting special characters
in
> > response on computers minicom but while typing on GTA02 minicom I
am not
>
> Sounds like wrong baudrate. Please first make sure you can talk
with getty.
>
but I am not using getty instead I am using minicom with same
baudrate.

-- 
" Even The word Impossible says I M Possible"
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.openmoko.org/pipermail/devel/attachments/20090609/cc0743f5/attachment-0001.htm

------------------------------

Message: 8
Date: Tue, 09 Jun 2009 09:24:31 +0300
From: Timo Juhani Lindfors 
Subject: Re: Serial port not working on GTA02 with debug board
To: Abhishek Bajpai 
Cc: devel at lists.openmoko.org
Message-ID: 
Content-Type: text/plain; charset=us-ascii

Abhishek Bajpai  writes:
> but I am not using getty instead I am using minicom with same
baudrate.

Did you check if the terminal settings are exactly same (stty -F
/dev/ttySAC2 -a)?

------------------------------

_______________________________________________
devel mailing list
devel at lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel

End of devel Digest, Vol 12, Issue 6
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090609/4c4cef3b/attachment-0001.htm 