Resolved: Re: GPS receiver broken (but no SDcard problem)

[Alexander Lehner]

OK, my GPS now works again - just by doing nothing ('nothing' means I was 
having dinner and a glas of wine).

There is no visible difference between the working state and the state 
where no satelites were seen:
dmesg shows the rxerr both times, frameworkd.log has the same messages and 
even in the working case I dont get data from cat -u /dev/ttySAC1 
(that one confuses me most... fso-gpsd is stopped, lsof shows no handle 
on it).

Pretty strange, but I simply hope it will last this way.

A.


On Mon, 15 Jun 2009, Alexander Lehner wrote:

>
>
> On Mon, 15 Jun 2009, Sebastian Krzyszkowiak wrote:
>
>> Check your dmesg. If you have rxerr messages, then you have the same
>> issue, as I.
>
> Yes, I have:
> ...
> [21474714.495000] s3c2440-sdi s3c2440-sdi: powered down.
> [21474714.495000] s3c2440-sdi s3c2440-sdi: powered down.
> [21474717.755000] rxerr: port=1 ch=0x00, rxs=0x0000000d
> [21474717.820000] rxerr: port=1 ch=0x00, rxs=0x0000000c
> [21474720.185000] modem wakeup interrupt
> [21474721.670000] modem wakeup interrupt
> [21474727.795000] rxerr: port=0 ch=0x00, rxs=0x0000000c
> [  237.080000] rxerr: port=1 ch=0x00, rxs=0x0000000c
> [  250.775000] rxerr: port=1 ch=0x00, rxs=0x0000000c
> [ 7081.115000] pcf50633 0-0073: Charging restarted
>
> What is 'this issue' that you have - is it good or bad :-/ ?
>
> BTW. the hint from Paul Ferster (looking at frameworkd.log) didn't bring
> up any news, also I verified that cat /dev/ttySAC1 doesn't work.
>
>
> Regards,
>
> Alex.
>
>
> _______________________________________________
> devel mailing list
> devel at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/devel
>
>