can't get git_git.paroli-project.org.paroli.git.tar.gz

[Daniel.Li]

On Fri, 2009-03-13 at 18:23 +0100, Daniel Willmann wrote:
> On Fri, 13 Mar 2009 23:58:49 +0800
> "Daniel.Li" <lida_mail at 163.com> wrote:
> 
> > On Fri, 2009-03-13 at 16:44 +0100, Daniel Willmann wrote:
> > > Hi,
> > > 
> > > On Fri, 13 Mar 2009 11:00:23 -0400
> > > Mirko Lindner <mirko at openmoko.com> wrote:
> > > 
> > > > Hi,
> > > > 
> > > > Daniel.Li wrote:
> > > > > Can anyone help on this.
> > > > > 
> > > > > Any hint is mostly appreciated. 
> > > > > 
> > > > > On Fri, 2009-03-13 at 19:52 +0800, Daniel.Li wrote:
> > > > >> Dear List,
> > > > >>
> > > > >> I have found that I can't get
> > > > >> http://downloads.openmoko.org/sources/git_git.paroli-project.org.paroli.git.tar.gz .
> > > > >>
> > > > >> I also tried wget
> > > > >> http://downloads.openmoko.org/sources/git_git.paroli-project.org.paroli.git.tar.gz,
> > > > >> but it didn't work.
> > > > >>
> > > > 
> > > > How did you end up with those addresses?
> > > 
> > > This is perfectly fine. OE first searches for a tar'd git
> > > repository in order to speed up checkout/update. If it doesn't find
> > > any (as in your case) it will continue to clone the repo from git.
> > > This is where OE fails in your case.
> > > 
> > > git clone -n
> > > http://git.paroli-project.org/paroli.git /home/daniel/freerunner/fso/fso-milestone5/downloads/git/git.paroli-project.org.paroli.git
> > > failed with signal 128, output: fatal:
> > > http://git.paroli-project.org/paroli.git/info/refs not found: did
> > > you run git update-server-info on the server?
> > > 
> > > I'm not really sure why that fails for you, it's working here.
> > 
> > Well, I'm confused also, see below my test with ping. It seems that
> > tcp/ip packet is filtered by the server 124.74.208.42.
> > 
> > But I don't know where the server is, and how to fix it.
> > 
> > Mirko has give me an address http://78.46.248.234/paroli.git/, it
> > works.
> > 
> > So how can I change the OE configuration file to fix the problem. I'm
> > NOT familiar with OE. I think Building the fso is my first step to
> > learn OE. 
> > 
> > Can u give me some advice on how to edit config files to fix the above
> > problem changing the ip address?
> > 
> > Maybe I should use grep to find the location. But I'm NOT sure if I
> > can do this correctly.
> > 
> > Any hint is well appreciated. Thanks for all ur help:)
> > 
> > 
> > $ ping git.paroli-project.orgg
> > PING git.paroli-project.orgg (218.83.175.155) 56(84) bytes of data.
> > >From 124.74.208.42 icmp_seq=182 Packet filtered
> 
> Okay, let's see. The first thing I notice is that you misspelled
> git.paroli-project.org, 
> so the fact that this even resolves probably
> means that your provider is resolving non-existent DNS names to some IP
> with an error page. Try to ping git.paroli-project.org and see if that
> resolves to the IP mirko gave you (78.46.248.234). If not someone is
> screwing with your DNS.

sorry. I tried again.

$ ping 78.46.248.234
PING 78.46.248.234 (78.46.248.234) 56(84) bytes of data.
64 bytes from 78.46.248.234: icmp_seq=1 ttl=47 time=1025 ms
64 bytes from 78.46.248.234: icmp_seq=2 ttl=47 time=362 ms

$ ping git.paroli-project.org
ping: unknown host git.paroli-project.org

> 
> Both the IP you got for git.paroli-project.orgg as well as the one that
> filtered ping are from China Telecom so they're probably the ones to
> blame.
> 

Humm,,, I will check with the provider today. Thanks for pointing me the
right direction.

> netname:      CHINANET-SH
> descr:        CHINANET Shanghai province network
> descr:        Data Communication Division
> descr:        China Telecom
> country:      CN
> 
> 
> Regards,
> Daniel Willmann
-- 
Daniel.Li <lida_mail at 163.com>
PALFocus (http://palfocus.oicp.net)