SHR - testing, stable and unstable - problem with Intone/earphones

Paul Fertser fercerpav at
Tue Nov 2 20:57:36 CET 2010

On Wed, Nov 03, 2010 at 06:55:22AM +1100, Philip Rhoades wrote:
> On 2010-11-02 19:35, Paul Fertser wrote:
>> Philip Rhoades<phil at>  writes:
>>> I worked out what it was - the plug is very sensitive to position - it
>>> should NOT be pushed all the way in, otherwise you get mono and I was
>>> only listening in one earpiece!
>> You're using a wrong 2.5mm<->  3.5mm adapter, check the pinout at the
>> wiki.
> Thanks for the note but how could the pinouts be wrong? - if the plug is  
> not pushed all the way in (there is about a 2mm gap) I get stereo fine  
> so the pinouts should be fine?

Typical symptom of wrong pinout. Have you _actually_ checked it?

Be free, use free ( software!
mailto:fercerpav at

More information about the devel mailing list