[PATCH 2/2] main: Populate the final interface structure before printing it

Stefan Schmidt stefan at datenfreihafen.org
Wed May 18 11:23:16 CEST 2011


On Sun, 2011-02-06 at 15:15, Stefan Schmidt wrote:
> On Fri, 2011-02-04 at 14:00, Tormod Volden wrote:
> > 
> > I noticed I missed a libusb_free_config_descriptor(config) in below
> > patch. But I also have a growing feeling I am just papering over
> > another bug or something should be done architecture-wise, so please
> > hold-off this patch. I hope we can come up with something better.
> OK, I'm waiting with this one. Applied and pushed the first patch. Thanks for
> it.
> Once I tracked down my current problem with the Freerunner and my libusb-1.0
> branch it will get merged into master in preparation for a 0.4 release.

Took me longer then expected to come back to this...

The libusb-1.0 branch works now with my freerunner and the other
devices I have. The problem was related to the fact that the
freerunner starts in runtime mode and I had introduced a bug in this

I guess your device is already in DFU mode if you start dfu-util?

There is still one problem I do not fully understand which hold me
back merging the code into the master branch yet. It seems to be
related to what you are seeing and trying to address with your patch.
I will reply there.

Stefan Schmidt

More information about the devel mailing list