ipkg update problem (in us-ascii I hope
Philippe MONROUX
phi2-monroux at wanadoo.fr
Thu Dec 13 03:26:46 CET 2007
Thanks for your reply.
De (from) (von), Chia-I Wu <olv at openmoko.org> :
> How do you set up you network connection on neo?
fic-gta01-->zandette-->papillon-->ROUTER-->INTERNET
1 2 3
1 usb connexion
2 and 3 ethernet connexions
fic-gta01=neo : usb0 address 192.168.0.202
zandette= my desktop : usb0 192.168.0.200 (left) eth0 10.0.0.1 (right)
papillon=FIREWALL(BRIGE) soekris machine running debian-router configured as a bridge firewall : br0 10.0.0.137
ROUTER= alcatel speedtouch home (flashed to make it PRO) : eth0 10.0.0.138 (left) ppp dy,amic IP (right)
Here are routing table of my computers :
fic-gta01
,----
| root at fic-gta01:~$ route
| Kernel IP routing table
| Destination Gateway Genmask Flags Metric Ref Use Iface
| 192.168.0.0 * 255.255.255.0 U 0 0 0 usb0
| default 192.168.0.200 0.0.0.0 UG 0 0 0 usb0
`----
zandette
,----
| root at zandette:~ >0 job $> route
| Table de routage IP du noyau
| Destination Passerelle Genmask Indic Metric Ref Use Iface
| fic-gta01 * 255.255.255.255 UH 0 0 0 usb0
| 192.168.0.0 * 255.255.255.0 U 0 0 0 usb0
| 10.0.0.0 * 255.0.0.0 U 0 0 0 eth0
| default SpeeTouch.homel 0.0.0.0 UG 0 0 0 eth0
`----
papillon
,----
| papillon:~# route
| Kernel IP routing table
| Destination Gateway Genmask Flags Metric Ref Use Iface
| 10.0.0.0 * 255.0.0.0 U 0 0 0 br0
| default 10.0.0.138 0.0.0.0 UG 0 0 0 b0r
`----
ROUTER
,----
| IP route table
| Destination Source Gateway Intf
| 80.8.221.60/32 any 80.8.221.60 PPP
| 10.0.0.138/32 any 10.0.0.138 eth0
| 127.0.0.1/32 any 127.0.0.1 loop
| 10.0.0.0/8 any 10.0.0.138 eth0
| default 10.0.0.1/0 80.8.221.60 PPP
`----
----------------------------------------------------------------------
From fic-gta01 I can make:
ping 192.168.0.200
ping 10.0.0.1
but
ping 10.0.0.137 or 138
5 packets transmitted, 0 packets received, 100% packet loss
I think they are REACHABLE
----------------------------------------------------------------------
From zandette I can make all :
ping 10.0.0.137
ping 10.0.0.138
ping 192.168.0.202
----------------------------------------------------------------------
from papillon I can make :
ping 10.0.0.138
ping 10.0.0.1
but
ping 192.168.0.200
7 packets transmitted, 0 received, 100% packet loss
----------------------------------------------------------------------
> This is highly environment dependent, but in the simplest(?) way, you
> need to set up NAT on the host and point to the right nameserver on neo.
----------------------------------------------------------------------
root at fic-gta01:~$ cat /etc/resolv.conf
nameserver 192.168.0.200
----------------------------------------------------------------------
root at zandette:~ >0 job $> cat /etc/resolv.conf
search local.net
nameserver 10.0.0.138
nameserver 193.252.19.3
nameserver 193.252.19.4
----------------------------------------------------------------------
perhaps I have to add route from papillon to neo ?
Philippe MONROUX
--
http://perso.orange.fr/zygomaths/index.fr.html
http://www.gral.re
More information about the device-owners
mailing list