Help with DFU Mode (P1 Device)
bradpitcher at gmail.com
Tue Jul 31 20:51:43 CEST 2007
These instructions on the wiki worked fine for me:
On 7/31/07, andrej w. <awu.moko at gmail.com> wrote:
> i think it is irrelevant when to fire up the dfu-util, as long as you
> changed the state of the
> console input (that is "Set console to USB"), right?
> Did anybody managed to gain remote ssh access to the unit? I am
> constantly getting "connection refused"
> errors, while trying. Btw. I have used yesterdays rootfs and kernel
> images (2007_07_30).
> Peter Trapp schrieb:
> > On Monday 30 July 2007 01:19, Bobby Edmonds wrote:
> >> I cannot get my unit into DFU Mode.
> >> When I get the boot menu if I do a "dfu-util -l" I get the following
> >> (Runtime Mode):
> >> dfu-util - (C) 2007 by OpenMoko Inc.
> >> This program is Free Software and has ABSOLUTELY NO WARRANTY
> >> Found DFU Runtime: [0x1457:0x5119] devnum=18, cfg=0, intf=2, alt=0,
> >> name="USB Device Firmware Upgrade"
> >> If I select "Set console to USB" it briefly displays another screen
> >> says "Press [AUX] to return to boot menu" and then rolls back to the
> >> boot menu.
> > I guess you've already done it, so for all others...
> > I figured out the same :) My workaround is quite easy.
> > 1) prepare everything at the host side (including the ./dfu-util )
> > 2) "Set console to USB" and press "power"
> > 3) asap Neo changes to "Press [AUX] to return to boot menu" fire the
> > command on host side
> > Note: Neo switches back to the "boot-menu" but as long as the host
> > tell you anything different it should work :)
> > -homyx
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the device-owners