[gta02-core] Kicad PCB - first impressions

Álvaro Lopes alvieboy at alvie.com
Mon Aug 31 15:36:17 CEST 2009

Álvaro Lopes wrote:
> I was able to place microvias (see [1]) but not buried nor blind vias - it always complains vias are too small (I tried quite a few combinations of via
> diameter, drill size, and so on - no luck).
> Any ideas ?

Ok I found it. Apparently you have to start DRC by hand and change the parameters there.



More information about the gta02-core mailing list