[gta02-core] CPU part placement

[Dave Ball]

Werner Almesberger wrote:
> - what the HT-210 footprint calls pin 2 is HT-110's cathode 
> - pin 3 is is the anode
> - pin 1 is NC
>   
<snip>
> 1) Make a symbol for three pins (one NC) and the HT-210 numbering.
>    The unused pin (1) doesn't have to be drawn.
>   

I've re-numbered the ht110, but left the third pin (pin1) off.  I'm glad 
you checked the device, because if I was to compare the two datasheets I 
think I would have put 2/3 the other way round!

Dave