GSM-noise "buzz" issue

[Angus Ainslie]

On Fri, Oct 31, 2008 at 2:05 PM, Angus Ainslie <angus.ainslie at gmail.com>wrote:

> On Fri, Oct 31, 2008 at 1:45 PM, Joerg Reisenweber <joerg at openmoko.org>wrote:
>
>> You HAVE to replace R4303 0R with a 2k2 !! (check R from mic housing
>> MIC4301:2
>> to GND! Has to be 2k2, will read 0R usually)
>> Otherwise this cap fix CAN NOT work. Refer to schematics, please.
>>
>>
> Your original instructions said R4403, they also said that R4403 wasn't on
> any schematic so I didn't try to look for it. Where should it be in the
> schematic ? I didn't mention it but I did do that part as well. Well almost,
> the closest value I had was 2k
>
> Should it be R4303 ?
>
>
I found both of them and it should have been R4303. Back to the solder
station.

-- 
Angus Ainslie
http://www.handheldshell.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/hardware/attachments/20081031/89ca2f70/attachment.htm