[gta02-core] Audio rework
werner at openmoko.org
Tue Jun 23 22:57:48 CEST 2009
Rene Harder wrote:
> We keep the individual ECNs, in this way it's easier to have an overview
> of the changes.
> In the ECNs we shortly describe the reason/problem and refer to the ECN
> with the name "global audio rework".
> How does that sound?
> Maybe we should stay as it is right now or are there any problems with
> the current configuration?
As far as I know, there are no unresolved problems with the jack
insertion detection logic.
> I could not find a way to solve the biasing problem with a common ground
> for headphone and microphone. So i guess we need to stay with the dc
> blocking capacitors.
So it seems :-(
> These resistor will increase the resistance in the signal path and
> improve this situation a little bit.
Ah yes, that would make even more sense.
> Do yo know how much it will decrease the channel separation 10, 20 or 60 dB?
That's too deep in analog land for me to know, sorry :)
> Do we have any data about that microphone, e.g. part number, vendor etc.
It should be a Knowles SPM0208HE5:
http://media.digikey.com/pdf/Data Sheets/Knowles Acoustics PDFs/SPM0208HE5 Rev B.pdf
> I do not have a lot of information what the cause of this problem
> was/is. I think it would be better to find and solve the source of the
As far as I remember, the story went something like this:
- JK4401 acts as an antenna receiving the GSM's RF we emit
- the protection diodes of U4401 rectify the RF, thus acting as an
- the demodulated AM creeps via R4408 into MICBIAS, overlaying the
- signal gets amplified, etc.
I'm sure Joerg will set me straight if I missed any additional twist
in this tale :-)
More information about the hardware