Bug #1024 (oscillating re-camping), the story goes on...
joerg at openmoko.org
Mon Mar 30 21:38:22 CEST 2009
Am Mo 30. März 2009 schrieb Dieter Spaar:
> Hello Joerg,
> Joerg Reisenweber wrote:
> > Dieter, maybe we could have a debug-version of moko11 to implement a
> > AT command to tweak those config registers. This way we could ask users
> > actually can reproduce #1024 to check if there's any difference when
> > this power tweaking back and forth.
> This should be possible without too much effort. However we can probably
> only make it worse (less current), the oscillator current should be at the
> highest possible value in our firmware.
That's ok. This is the idea of all this tweaking anyway. If it gets worse with
lower power but doesn't break completely then we are rather sure it's caused
BTW sometimes osc run even more stable on lower power driving the crystal ;-)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 197 bytes
Desc: This is a digitally signed message part.
Url : http://lists.openmoko.org/pipermail/hardware/attachments/20090330/788a8a2d/attachment.pgp
More information about the hardware