debug board problem

Chia-I Wu olv at openmoko.com
Thu Sep 20 22:16:51 CEST 2007


Hi,

On Thu, Sep 20, 2007 at 03:43:06PM +0800, root wrote:
> I want to use debug board, so I insert ftdi_sio module in PC
> (modprobe ftdi_sio vendor=0x1457 product=0x5118).
> Now it can use correctly in u_boot(input/output), it can also print
> kernel messages,
> but can not input after kernel boot.
I guess you want to play with openocd, don't you?

You were connecting to the serial port, where you can issue u-boot
commands while u-boot is running.  To work with openocd, you should have
openocd configured and running, then use telnet to connect to it.

-- 
Regards,
olv




More information about the openmoko-kernel mailing list