[gta03] Fwd: MCU on EVB can run 533MHz with SDRAM 133 MHz

[xiangfu]

Andy Green wrote:
> Somebody in the thread at some point said:
> | Andy Green wrote:
> |> Somebody in the thread at some point said:
> |>
> |> | | so that make me can not use serial console debug the NAND_READ
> |> function :(
> |> |
> |> | Xiangfu I will try your code today and see if I can find any ideas.
> |>
> |> Hi -
> |>
> |> I try to start with your code, it seems I need ./image/start?
> |>
> |> $ make
> |> src/serial.c: In function ‘serial_putc’:
> |> src/serial.c:63: warning: implicit declaration of function ‘delay’
> |> /usr/local/openmoko/arm/bin/arm-angstrom-linux-gnueabi-ld
> |> -Tsrc/kboot-stage1.lds -g src/start.o src/lowlevel_init.o
> |> src/blink_led.o src/nand_read.o src/serial.o src/start_kboot.o -o
> |> src/start_kboot_all
> |> /usr/local/openmoko/arm/bin/arm-angstrom-linux-gnueabi-objcopy -O 
> binary
> |> -S src/start_kboot_all image/start
> |> /usr/local/openmoko/arm/bin/arm-angstrom-linux-gnueabi-objcopy:
> |> image/start: No such file or directory   <========
> |> make: *** [src/start_kboot_all] Error 1
> |>
> |> what actually is that?
> |>
> |> -Andy
> | it seems that you don't have the image directory
>
> Thanks, I figured it out... I was remembering you used to put images
> directly in the binary for a while and thought it might be that.
>
> -Andy
i use "load_image /path/to/image/start 0"
i get different output from MINICOM ? i don't know why .
most of the output is not correct.