[PATCH 00/15] KBOOT boots NAND kernel
matt_hsu
matt_hsu at openmoko.org
Wed Aug 13 08:26:20 CEST 2008
xiangfu wrote:
> Werner Almesberger wrote:
>> xiangfu wrote:
>>
>>> i try
>>> --git clone http://git.openmoko.org/git/kboot-stage1.git
>>> and it not get the Andy's patch.
>>>
>>
>> You almost got it right :-) It's
>>
>> git clone git://git.openmoko.org/git/kboot-stage1.git
>> ===
>>
>> - Werner
>>
> now i use openocd i get these error message, did i miss something.
Hi Xianfu,
What the default openocd config do you use?
Matt
> xiangfu at xiangfu-laptop:~$ sudo openocd
> Info: openocd.c:93 main(): Open On-Chip Debugger (2007-09-05 09:00
> CEST)
> Error: jtag.c:1301 jtag_examine_chain(): number of discovered
> devices in JTAG chain (578) doesn't match configuration (1)
> Error: jtag.c:1302 jtag_examine_chain(): check the config file and
> ensure proper JTAG communication (connections, speed, ...)
> Error: jtag.c:1440 jtag_init(): trying to validate configured JTAG
> chain anyway...
> Error: jtag.c:1357 jtag_validate_chain(): Error validating JTAG scan
> chain, IR mismatch, scan returned 0x01
> Error: embeddedice.c:181 embeddedice_build_reg_cache(): unknown
> EmbeddedICE version (comms ctrl: 0x00000000)
> Warning: telnet_server.c:545 telnet_init(): no telnet port specified,
> using default port 4444
>
> i also use dfu-kboot(write by andy) download kboot to "u-boot" partition.
> when i start the GTA02 ,it 's AUX LED always blink and screen go to
> light. it do not boot ,
> is there something with my GTA02. or which step i am wrong.
>
More information about the openmoko-kernel
mailing list