[PATCH 00/15] KBOOT boots NAND kernel
matt_hsu
matt_hsu at openmoko.org
Wed Aug 13 09:27:47 CEST 2008
xiangfu wrote:
> matt_hsu wrote:
>> Hi Xianfu,
>>
>> What the default openocd config do you use?
>> Matt
> now it's work again, i pull off the battery and unplug the usb cable ,
> wait a moment .
You can try to tune the jtag_speed. my jtag_speed config is set as 8.
> do it again .and it's work ,this alway happen sometime . but i still
> can not boot my GTA02 with andy's patch.
Well, I'm working on this but not GTA02. ;-)
Matt
> and i also got no output from serial console. or something is just a "�"
>
> there is the config:
> telnet port 4444
> gdb_port 3333
> interface ft2232
> jtag_speed 0
> ft2232_vid_pid 0x1457 0x5118
> ft2232_layout "jtagkey"
> reset_config trst_and_srst
> jtag_device 4 0x1 0xf 0xe
> daemon_startup attach
> target arm920t little reset_run 0 arm920t
> working_area 0 0x200000 0x4000 backup
> run_and_halt_time 0 5000
>
>
More information about the openmoko-kernel
mailing list