[PATCH 1/4] fix-allow-full-sd-voltage-range-selection.patch

Andy Green andy at openmoko.com
Wed Jul 30 13:52:18 CEST 2008


Until now we just drove the SD Card at 3.3V all the time.  But in
fact we can do better, and use a voltage negotiated with the
SD Card itself.

With the shipping 512MB Sandisk SD Card, 2.7V is negotiated which
gives 1.7dBm reduction in power on all the SD Card lines and should
further reduce GPS perturbation during SD Card usage.

Signed-off-by: Andy Green <andy at openmoko.com>
---

 arch/arm/mach-s3c2440/mach-gta02.c |   10 ++++------
 drivers/mfd/glamo/glamo-core.c     |   13 ++++++++++++-
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 1fcd3fd..382837d 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -604,7 +604,7 @@ static struct pcf50633_platform_data gta02_pcf_pdata = {
 		[PCF50633_REGULATOR_HCLDO] = {
 			.name		= "sd_3v3",
 			.voltage	= {
-				.init	= 3300,
+				.init	= 2000,
 				.max	= 3300,
 			},
 		},
@@ -1378,11 +1378,9 @@ gta02_glamo_mmc_set_power(unsigned char power_mode, unsigned short vdd)
 				return;
 			}
 			/* select and set the voltage */
-			if (vdd > 7) {
-				mv += 300 + 100 * (vdd - 8);
-				if (mv > 3500)
-					mv = 3500;
-			}
+			if (vdd > 7)
+				mv += 350 + 100 * (vdd - 8);
+			printk(KERN_INFO "SD power -> %dmV\n", mv);
 			pcf50633_voltage_set(pcf50633_global,
 					     PCF50633_REGULATOR_HCLDO, mv);
 			pcf50633_onoff_set(pcf50633_global,
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
index bea0387..f411446 100644
--- a/drivers/mfd/glamo/glamo-core.c
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -270,7 +270,18 @@ static struct platform_device glamo_mmc_dev = {
 struct glamo_mci_pdata glamo_mci_def_pdata = {
 	.gpio_detect		= 0,
 	.glamo_set_mci_power	= NULL, /* filled in from MFD platform data */
-	.ocr_avail		= MMC_VDD_32_33,
+	.ocr_avail	= MMC_VDD_20_21 |
+			  MMC_VDD_21_22 |
+			  MMC_VDD_22_23 |
+			  MMC_VDD_23_24 |
+			  MMC_VDD_24_25 |
+			  MMC_VDD_25_26 |
+			  MMC_VDD_26_27 |
+			  MMC_VDD_27_28 |
+			  MMC_VDD_28_29 |
+			  MMC_VDD_29_30 |
+			  MMC_VDD_30_31 |
+			  MMC_VDD_32_33,
 	.glamo_irq_is_wired	= NULL, /* filled in from MFD platform data */
 	.mci_suspending = NULL, /* filled in from MFD platform data */
 	.mci_all_dependencies_resumed = NULL, /* filled in from MFD plat data */





More information about the openmoko-kernel mailing list