flash image from SD card

[Wolfgang Spraul]

fyi

On Mar 28, 2008, at 4:04 PM, Neng-Yu Tu (Tony Tu) wrote:

> Willie:
>
> Please cc athtony in all later mail about kernel issue.
>
> Thanks.
>
> Tony Tu
>
>
> Willie Chen ??:
>> Hi Werner,
>> We met one problem. We use the commands to flash images.
>> $ flash_eraseall -q $dev
>> $ nandwrite -p -q $dev $image
>> But we get error messages as following:
>> U-Boot 1.3.2-rc2 (Mar 21 2008 - 00:08:26)
>> I2C:   ready
>> DRAM:  128 MB
>> Flash:  2 MB
>> NAND:  256 MiB
>> *** Warning - bad CRC or NAND, using default environment
>> Glamo core device ID: 0x3650, Revision 0x0002
>> USB:   S3C2410 USB Deviced
>> mtdparts variable not set, see 'help mtdparts'
>> mtdparts variable not set, see 'help mtdparts'
>> mtdparts variable not set, see 'help mtdparts'
>> mtdparts variable not set, see 'help mtdparts'
>> mtdparts variable not set, see 'help mtdparts'
>> When we use the dfu-util to re-flash u-boot and u-boot.env,
>> we can read correct u-boot.env and boot system. Could you help
>> us check this problem? Thanks.
>> Regards,
>> Willie
>