[PATCH 3/8] improve-style-neo1973_pm_bt.patch

[Nelson Castillo]

Remove unwanted spaces.
Small style improvements.

Signed-off-by: Nelson Castillo <nelsoneci at gmail.com>
---

 0 files changed, 0 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
index 8be584c..0abed49 100644
--- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
+++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c
@@ -1,7 +1,7 @@
 /*
- * Bluetooth PM code for the FIC Neo1973 GSM Phone
+ * Bluetooth PM code for the Openmoko GTA01/GTA02 GSM Phone
  *
- * (C) 2007 by Openmoko Inc.
+ * (C) 2007-2008 by Openmoko Inc.
  * Author: Harald Welte <laforge at openmoko.org>
  * All rights reserved.
  *
@@ -29,18 +29,17 @@
 #include <linux/pcf50633.h>
 
 
-#define DRVMSG "FIC Neo1973 Bluetooth Power Management"
+#define DRVMSG "Openmoko GTA01/GTA02 Bluetooth Power Management"
 
 static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
 		       char *buf)
 {
-	int ret = 0;	
+	int ret = 0;
 
 	if (!strcmp(attr->attr.name, "power_on")) {
-
 		if (machine_is_neo1973_gta01()) {
 			if (pcf50606_onoff_get(pcf50606_global,
-						PCF50606_REGULATOR_D1REG) &&
+					       PCF50606_REGULATOR_D1REG) &&
 			    pcf50606_voltage_get(pcf50606_global,
 						 PCF50606_REGULATOR_D1REG) == 3100)
 				ret = 1;
@@ -89,11 +88,13 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
 				return count;
 			neo1973_gpb_setpin(GTA02_GPIO_BT_EN, !on);
 			pcf50633_voltage_set(pcf50633_global,
-				PCF50633_REGULATOR_LDO4, on ? 3200 : 0);
+					     PCF50633_REGULATOR_LDO4,
+					     on ? 3200 : 0);
 			pcf50633_onoff_set(pcf50633_global,
-				PCF50633_REGULATOR_LDO4, on);
+					   PCF50633_REGULATOR_LDO4,
+					   on);
 			vol = pcf50633_voltage_get(pcf50633_global,
-				PCF50633_REGULATOR_LDO4);
+						   PCF50633_REGULATOR_LDO4);
 			dev_info(dev, "GTA02 Set PCF50633 LDO4 = %d\n", vol);
 			neo1973_gpb_setpin(GTA02_GPIO_BT_EN, on);
 		}
@@ -154,14 +155,14 @@ static int __init gta01_bt_probe(struct platform_device *pdev)
 		pcf50606_onoff_set(pcf50606_global,
 				   PCF50606_REGULATOR_D1REG, 0);
 		/* we pull reset to low to make sure that the chip doesn't
-	 	 * drain power through the reset line */
+		 * drain power through the reset line */
 		neo1973_gpb_setpin(GTA01_GPIO_BT_EN, 0);
 	} else if (machine_is_neo1973_gta02()) {
 		/* we make sure that the voltage is off */
 		pcf50633_onoff_set(pcf50633_global,
-				     PCF50633_REGULATOR_LDO4, 0);
+				   PCF50633_REGULATOR_LDO4, 0);
 		/* we pull reset to low to make sure that the chip doesn't
-	 	 * drain power through the reset line */
+		 * drain power through the reset line */
 		neo1973_gpb_setpin(GTA02_GPIO_BT_EN, 0);
 	}