[PATCH] qi-rename-tla01-gta03.patch
Andy Green
andy at openmoko.com
Sat Oct 25 10:06:53 CEST 2008
TLA01 is officially GTA03 now :-)
Signed-off-by: Andy Green <andy at openmoko.com>
---
gta02-qi.ocd | 34 +++++
gta03-qi.ocd | 34 -----
include/neo_gta03.h | 12 +-
include/neo_tla01.h | 28 ----
src/cpu/s3c2442/gta03.c | 289 --------------------------------------------
src/cpu/s3c2442/start_qi.c | 1
src/cpu/s3c6410/gta03.c | 225 ++++++++++++++++++++++++++++++++++
src/cpu/s3c6410/qi.lds | 2
src/cpu/s3c6410/start_qi.c | 4 -
src/cpu/s3c6410/tla01.c | 220 ---------------------------------
10 files changed, 266 insertions(+), 583 deletions(-)
create mode 100755 gta02-qi.ocd
delete mode 100755 gta03-qi.ocd
delete mode 100644 include/neo_tla01.h
delete mode 100644 src/cpu/s3c2442/gta03.c
create mode 100644 src/cpu/s3c6410/gta03.c
delete mode 100644 src/cpu/s3c6410/tla01.c
diff --git a/gta02-qi.ocd b/gta02-qi.ocd
new file mode 100755
index 0000000..9d2cf1f
--- /dev/null
+++ b/gta02-qi.ocd
@@ -0,0 +1,34 @@
+# gta02 Qi script
+# Andy Green <andy at openmoko.com>
+
+reset halt
+wait_halt
+sleep 2000
+
+# bring the steppingstone part of qi image into steppingstone
+#
+load_binary /projects/openmoko/bootloader/image/qi 0x0
+#
+# mark ourselves as JTAG load
+#
+mww 0x4 0xffffffff
+
+#
+# we have to run that so SDRAM exists in a usable way
+# fixed jumpthrough at 0x8 is executed after steppingstone
+# init (including RAM) has completed
+#
+bp 0x8 4 hw
+resume 0x0
+wait_halt
+rbp 0x8
+
+#
+# now prep the SDRAM
+#
+load_binary /projects/openmoko/bootloader/image/qi 0x33000000
+#
+# and continue...
+resume 0x8
+#
+
diff --git a/gta03-qi.ocd b/gta03-qi.ocd
deleted file mode 100755
index 7513767..0000000
--- a/gta03-qi.ocd
+++ /dev/null
@@ -1,34 +0,0 @@
-# gta03 Qi script
-# Andy Green <andy at openmoko.com>
-
-reset halt
-wait_halt
-sleep 2000
-
-# bring the steppingstone part of qi image into steppingstone
-#
-load_binary /projects/openmoko/bootloader/image/qi 0x0
-#
-# mark ourselves as JTAG load
-#
-mww 0x4 0xffffffff
-
-#
-# we have to run that so SDRAM exists in a usable way
-# fixed jumpthrough at 0x8 is executed after steppingstone
-# init (including RAM) has completed
-#
-bp 0x8 4 hw
-resume 0x0
-wait_halt
-rbp 0x8
-
-#
-# now prep the SDRAM
-#
-load_binary /projects/openmoko/bootloader/image/qi 0x33000000
-#
-# and continue...
-resume 0x8
-#
-
diff --git a/include/neo_gta03.h b/include/neo_gta03.h
index a01972e..110b795 100644
--- a/include/neo_gta03.h
+++ b/include/neo_gta03.h
@@ -1,8 +1,8 @@
/*
- * (C) Copyright 2008 OpenMoko, Inc.
- * Author: Matt Hsu <matt_hsu at openmoko.org>
+ * (C) Copyright 2007 OpenMoko, Inc.
+ * Author: xiangfu liu <xiangfu at openmoko.org>
*
- * Configuation settings for the Openmoko GTA03 Linux GSM phone
+ * Configuation settings for the FIC Neo GTA02 Linux GSM phone
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -20,13 +20,9 @@
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_GTA03_H
-#define __CONFIG_GTA03_H
#ifndef __ASM_MODE__
#include <qi.h>
extern const struct board_api board_api_gta03;
#endif
-#define TEXT_BASE 0x33000000
-
-#endif /* __CONFIG_GTA03_H */
+#define TEXT_BASE_GTA03 0x53000000
diff --git a/include/neo_tla01.h b/include/neo_tla01.h
deleted file mode 100644
index 6d9ca72..0000000
--- a/include/neo_tla01.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2007 OpenMoko, Inc.
- * Author: xiangfu liu <xiangfu at openmoko.org>
- *
- * Configuation settings for the FIC Neo GTA02 Linux GSM phone
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_MODE__
-#include <qi.h>
-extern const struct board_api board_api_tla01;
-#endif
-
-#define TEXT_BASE_TLA01 0x53000000
diff --git a/src/cpu/s3c2442/gta03.c b/src/cpu/s3c2442/gta03.c
deleted file mode 100644
index 73fa268..0000000
--- a/src/cpu/s3c2442/gta03.c
+++ /dev/null
@@ -1,289 +0,0 @@
-#include <qi.h>
-#include <neo_gta03.h>
-#include <serial-s3c24xx.h>
-#include <ports-s3c24xx.h>
-#include <i2c-bitbang-s3c24xx.h>
-#include <pcf50633.h>
-#include <s3c24xx-mci.h>
-
-#define GTA03_DEBUG_UART 2
-
-#define PCF50633_I2C_ADS 0x73
-
-
-static const struct board_variant board_variants[] = {
- [0] = {
- .name = "EVB PCB",
- .machine_revision = 0x010,
- },
-};
-
-void port_init_gta03(void)
-{
- unsigned int * MPLLCON = (unsigned int *)0x4c000004;
- unsigned int * UPLLCON = (unsigned int *)0x4c000008;
- unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
-
- //CAUTION:Follow the configuration order for setting the ports.
- // 1) setting value(GPnDAT)
- // 2) setting control register (GPnCON)
- // 3) configure pull-up resistor(GPnUP)
-
- /* 32bit data bus configuration */
- /*
- * === PORT A GROUP
- * Ports : GPA22 GPA21 GPA20 GPA19 GPA18 GPA17 GPA16 GPA15 GPA14 GPA13 GPA12
- * Signal : nFCE nRSTOUT nFRE nFWE ALE CLE nGCS5 nGCS4 nGCS3 nGCS2 nGCS1
- * Binary : 1 1 1 , 1 1 1 1 , 1 1 1 1
- * Ports : GPA11 GPA10 GPA9 GPA8 GPA7 GPA6 GPA5 GPA4 GPA3 GPA2 GPA1 GPA0
- * Signal : ADDR26 ADDR25 ADDR24 ADDR23 ADDR22 ADDR21 ADDR20 ADDR19 ADDR18 ADDR17 ADDR16 ADDR0
- * Binary : 1 1 1 1 , 1 1 1 1 , 1 1 1 1
- */
- rGPACON = 0x007F8FFF;
- /*
- * ===* PORT B GROUP
- * Ports : GPB10 GPB9 GPB8 GPB7 GPB6 GPB5 GPB4 GPB3 GPB2 GPB1 GPB0
- * Signal : nXDREQ0 nXDACK0 nXDREQ1 nXDACK1 nSS_KBD nDIS_OFF L3CLOCK L3DATA L3MODE nIrDATXDEN Keyboard
- * Setting: INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
- * Binary : 00 , 01 00 , 01 00 , 01 01 , 01 01 , 01 01
- */
- rGPBCON = 0x00145554;
- rGPBDAT |= (1 <<9 ); /* USB_PULLUP */
- rGPBUP = 0x000007FF;
- /*
- * === PORT C GROUP
- * Ports : GPC15 GPC14 GPC13 GPC12 GPC11 GPC10 GPC9 GPC8 GPC7 GPC6 GPC5 GPC4 GPC3 GPC2 GPC1 GPC0
- * Signal : VD7 VD6 VD5 VD4 VD3 VD2 VD1 VD0 LCDVF2 LCDVF1 LCDVF0 VM VFRAME VLINE VCLK LEND
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10
- */
- rGPCCON = 0xAAA776E9;
- rGPCUP = 0x0000FFFF;
- rGPCDAT |= (1 << 9); /* WLAN_nRESET pull high */
- /*
- * === PORT D GROUP
- * Ports : GPD15 GPD14 GPD13 GPD12 GPD11 GPD10 GPD9 GPD8 GPD7 GPD6 GPD5 GPD4 GPD3 GPD2 GPD1 GPD0
- * Signal : VD23 VD22 VD21 VD20 VD19 VD18 VD17 VD16 VD15 VD14 VD13 VD12 VD11 VD10 VD9 VD8
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,10 10
- */
- rGPDCON = 0xAAA0AAA5;
- rGPDUP = 0x0000FFFF;
- /*
- * === PORT E GROUP
- * Ports : GPE15 GPE14 GPE13 GPE12 GPE11 GPE10 GPE9 GPE8 GPE7 GPE6 GPE5 GPE4
- * Signal : IICSDA IICSCL SPICLK SPIMOSI SPIMISO SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDCMD SDCLK I2SSDO
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,
- * -------------------------------------------------------------------------------------------------------
- * Ports : GPE3 GPE2 GPE1 GPE0
- * Signal : I2SSDI CDCLK I2SSCLK I2SLRCK
- * Binary : 10 10 , 10 10
- */
- rGPECON = 0xAAAAAAAA;
- rGPEUP = 0x0000FFFF;
- /*
- * === PORT F GROUP
- * Ports : GPF7 GPF6 GPF5 GPF4 GPF3 GPF2 GPF1 GPF0
- * Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
- * Setting: Output Output Output Output EINT3 EINT2 EINT1 EINT0
- * Binary : 01 01 , 01 01 , 10 10 , 10 10
- */
- rGPFCON = 0x0000AAAA;
- rGPFUP = 0x000000FF;
-
- /*
- * === PORT G GROUP
- * Ports : GPG15 GPG14 GPG13 GPG12 GPG11 GPG10 GPG9 GPG8 GPG7 GPG6
- * Signal : nYPON YMON nXPON XMON EINT19 DMAMODE1 DMAMODE0 DMASTART KBDSPICLK KBDSPIMOSI
- * Setting: nYPON YMON nXPON XMON EINT19 Output Output Output SPICLK1 SPIMOSI1
- * Binary : 11 11 , 11 11 , 10 01 , 01 01 , 11 11
- * -----------------------------------------------------------------------------------------
- * Ports : GPG5 GPG4 GPG3 GPG2 GPG1 GPG0
- * Signal : KBDSPIMISO LCD_PWREN EINT11 nSS_SPI IRQ_LAN IRQ_PCMCIA
- * Setting: SPIMISO1 LCD_PWRDN EINT11 nSS0 EINT9 EINT8
- * Binary : 11 11 , 10 11 , 10 10
- */
- rGPGCON = 0x02A9FE5A;
- rGPGUP = 0x0000FFFF;
-
- /*
- * === PORT H GROUP
- * Ports : GPH10 GPH9 GPH8 GPH7 GPH6 GPH5 GPH4 GPH3 GPH2 GPH1 GPH0
- * Signal : CLKOUT1 CLKOUT0 UCLK RXD2 TXD2 RXD1 TXD1 RXD0 TXD0 nRTS0 nCTS0
- * Binary : 10 , 10 10 , 11 11 , 10 10 , 10 10 , 10 10
- */
- /* pulldown on GPH08: UEXTCLK, just floats!
- * pulldown GPH0 -- nCTS0 / RTS_MODEM -- floats when GSM off
- * pulldown GPH3 -- RXD[0] / TX_MODEM -- floats when GSM off
- */
- rGPHCON = 0x0019A0AA;
- rGPHUP = 0x000007FF;
-
- /* pulldown on GPJ00: input, just floats! */
- /* pulldown on GPJ07: WLAN module WLAN_GPIO0, no ext pull */
- rGPJCON = 0x02AAAAAA;
- rGPJUP = 0x1FFFF;
-
- /*
- * We have to talk to the PMU a little bit
- */
-
- /* We need SD Card rail (HCLDO) at 3.0V */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOOUT,
- 21);
-
- /* switch HCLDO on */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOENA, 1);
-
- /* push DOWN1 (CPU Core rail) to 1.7V, allowing 533MHz */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
- 0x2b);
-
- /* change CPU clocking to 533MHz 1:4:8 */
-
- /* clock divide 1:4:8 - do it first */
- *CLKDIVN = 5;
- /* configure UPLL */
- *UPLLCON = ((88 << 12) + (4 << 4) + 2);
- /* Magic delay: Page 7-19, seven nops between UPLL and MPLL */
- asm __volatile__ (
- "nop\n"\
- "nop\n"\
- "nop\n"\
- "nop\n"\
- "nop\n"\
- "nop\n"\
- "nop\n"\
- );
- /* configure MPLL */
- *MPLLCON = ((169 << 12) + (2 << 4) + 1);
-
-
- serial_init_115200_s3c24xx(GTA03_DEBUG_UART, 66 /*MHz PCLK */);
-}
-
-/**
- * returns PCB revision information in b0, d8, d9
- * GTA03 EVB returns 0x000
- * GTA03 returns 0x001
- */
-
-int gta03_get_pcb_revision(void)
-{
- int n;
- u32 u;
-
- /* make B0 inputs */
- rGPBCON &= ~0x00000003;
- /* D8 and D9 inputs */
- rGPDCON &= ~0x000f0000;
-
- /* delay after changing pulldowns */
- u = rGPBDAT;
- u = rGPDDAT;
-
- /* read the version info */
- u = rGPBDAT;
- n = (u >> (0 - 0))& 0x001;
- u = rGPDDAT;
- n |= (u >> (8 -1)) & 0x002;
- n |= (u >> (9 - 2)) & 0x004;
-
- /*
- * when not being interrogated, all of the revision GPIO
- * are set to output
- */
- /* make B0 high ouput */
- rGPBCON |= 0x00000001;
- /* D8 and D9 high ouputs */
- rGPDCON |= 0x00050000;
-
- return n;
-
-}
-
-const struct board_variant const * get_board_variant_gta03(void)
-{
- return &board_variants[gta03_get_pcb_revision()];
-}
-
-int is_this_board_gta03(void)
-{
- /* FIXME: find something gta03 specific */
- return 1;
-}
-
-static void putc_gta03(char c)
-{
- serial_putc_s3c24xx(GTA03_DEBUG_UART, c);
-}
-
-int sd_card_init_gta03(void)
-{
- return s3c24xx_mmc_init(1);
-}
-
-int sd_card_block_read_gta03(unsigned char * buf, unsigned long start512,
- int blocks512)
-{
- return s3c24xx_mmc_bread(0, start512, blocks512, buf);
-}
-
-
-
-/*
- * our API for bootloader on this machine
- */
-const struct board_api board_api_gta03 = {
- .name = "GTA03-2442",
- .linux_machine_id = 1866,
- .linux_mem_start = 0x30000000,
- .linux_mem_size = (128 * 1024 * 1024),
- .linux_tag_placement = 0x30000000 + 0x100,
- .get_board_variant = get_board_variant_gta03,
- .is_this_board = is_this_board_gta03,
- .port_init = port_init_gta03,
- .putc = putc_gta03,
- /* these are the ways we could boot GTA03 in order to try */
- .kernel_source = {
- [0] = {
- .name = "SD Card EXT2 Kernel",
- .block_init = sd_card_init_gta03,
- .block_read = sd_card_block_read_gta03,
- .partition_index = 1,
- .filesystem = FS_EXT2,
- .filepath = "boot/uImage.bin",
- .commandline = "mtdparts=physmap-flash:-(nor);" \
- "neo1973-nand:" \
- "0x00040000(qi)," \
- "0x00040000(cmdline)," \
- "0x00800000(backupkernel)," \
- "0x000a0000(extra)," \
- "0x00040000(identity)," \
- "0x0f6a0000(backuprootfs) " \
- "rootfstype=ext2 " \
- "root=/dev/mmcblk0p1 " \
- "console=ttySAC2,115200 " \
- "loglevel=4 " \
- "init=/sbin/init "\
- "ro"
- },
- [1] = {
- .name = "NAND Kernel",
- .block_read = nand_read_ll,
- .offset_blocks512_if_no_partition = 0x80000 / 512,
- .filesystem = FS_RAW,
- .commandline = "mtdparts=neo1973-nand:" \
- "0x00040000(qi)," \
- "0x00040000(cmdline)," \
- "0x00800000(backupkernel)," \
- "0x000a0000(extra)," \
- "0x00040000(identity)," \
- "0x0f6a0000(backuprootfs) " \
- "rootfstype=jffs2 " \
- "root=/dev/mtdblock6 " \
- "console=ttySAC2,115200 " \
- "loglevel=4 " \
- "init=/sbin/init "\
- "ro"
- },
- },
-};
diff --git a/src/cpu/s3c2442/start_qi.c b/src/cpu/s3c2442/start_qi.c
index 6c19394..38a95ba 100644
--- a/src/cpu/s3c2442/start_qi.c
+++ b/src/cpu/s3c2442/start_qi.c
@@ -37,7 +37,6 @@ extern void bootloader_second_phase(void);
const struct board_api *boards[] = {
&board_api_gta02,
- &board_api_gta03,
NULL /* always last */
};
diff --git a/src/cpu/s3c6410/gta03.c b/src/cpu/s3c6410/gta03.c
new file mode 100644
index 0000000..a6766d8
--- /dev/null
+++ b/src/cpu/s3c6410/gta03.c
@@ -0,0 +1,225 @@
+#include <qi.h>
+#include <neo_gta03.h>
+#include <serial-s3c64xx.h>
+//#include <ports-s3c24xx.h>
+//#include <i2c-bitbang-s3c24xx.h>
+#include <pcf50633.h>
+
+#define GTA03_DEBUG_UART 0
+
+#define PCF50633_I2C_ADS 0x73
+
+
+static const struct board_variant board_variants[] = {
+ [0] = {
+ .name = "SMDK",
+ .machine_revision = 0,
+ },
+ [1] = {
+ .name = "GTA03 EVT1",
+ .machine_revision = 1
+ }
+};
+
+void port_init_gta03(void)
+{
+#if 0
+ unsigned int * MPLLCON = (unsigned int *)0x4c000004;
+ unsigned int * UPLLCON = (unsigned int *)0x4c000008;
+ unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
+
+ //CAUTION:Follow the configuration order for setting the ports.
+ // 1) setting value(GPnDAT)
+ // 2) setting control register (GPnCON)
+ // 3) configure pull-up resistor(GPnUP)
+
+ /* 32bit data bus configuration */
+ /*
+ * === PORT A GROUP
+ * Ports : GPA22 GPA21 GPA20 GPA19 GPA18 GPA17 GPA16 GPA15 GPA14 GPA13 GPA12
+ * Signal : nFCE nRSTOUT nFRE nFWE ALE CLE nGCS5 nGCS4 nGCS3 nGCS2 nGCS1
+ * Binary : 1 1 1 , 1 1 1 1 , 1 1 1 1
+ * Ports : GPA11 GPA10 GPA9 GPA8 GPA7 GPA6 GPA5 GPA4 GPA3 GPA2 GPA1 GPA0
+ * Signal : ADDR26 ADDR25 ADDR24 ADDR23 ADDR22 ADDR21 ADDR20 ADDR19 ADDR18 ADDR17 ADDR16 ADDR0
+ * Binary : 1 1 1 1 , 1 1 1 1 , 1 1 1 1
+ */
+ rGPACON = 0x007F8FFF;
+ /*
+ * ===* PORT B GROUP
+ * Ports : GPB10 GPB9 GPB8 GPB7 GPB6 GPB5 GPB4 GPB3 GPB2 GPB1 GPB0
+ * Signal : nXDREQ0 nXDACK0 nXDREQ1 nXDACK1 nSS_KBD nDIS_OFF L3CLOCK L3DATA L3MODE nIrDATXDEN Keyboard
+ * Setting: INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
+ * Binary : 00 , 01 00 , 01 00 , 01 01 , 01 01 , 01 01
+ */
+ rGPBCON = 0x00145554;
+ rGPBDAT |= (1 <<9 ); /* USB_PULLUP */
+ rGPBUP = 0x000007FF;
+ /*
+ * === PORT C GROUP
+ * Ports : GPC15 GPC14 GPC13 GPC12 GPC11 GPC10 GPC9 GPC8 GPC7 GPC6 GPC5 GPC4 GPC3 GPC2 GPC1 GPC0
+ * Signal : VD7 VD6 VD5 VD4 VD3 VD2 VD1 VD0 LCDVF2 LCDVF1 LCDVF0 VM VFRAME VLINE VCLK LEND
+ * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10
+ */
+ rGPCCON = 0xAAA776E9;
+ rGPCUP = 0x0000FFFF;
+ rGPCDAT |= (1 << 9); /* WLAN_nRESET pull high */
+ /*
+ * === PORT D GROUP
+ * Ports : GPD15 GPD14 GPD13 GPD12 GPD11 GPD10 GPD9 GPD8 GPD7 GPD6 GPD5 GPD4 GPD3 GPD2 GPD1 GPD0
+ * Signal : VD23 VD22 VD21 VD20 VD19 VD18 VD17 VD16 VD15 VD14 VD13 VD12 VD11 VD10 VD9 VD8
+ * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,10 10
+ */
+ rGPDCON = 0xAAA0AAA5;
+ rGPDUP = 0x0000FFFF;
+ /*
+ * === PORT E GROUP
+ * Ports : GPE15 GPE14 GPE13 GPE12 GPE11 GPE10 GPE9 GPE8 GPE7 GPE6 GPE5 GPE4
+ * Signal : IICSDA IICSCL SPICLK SPIMOSI SPIMISO SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDCMD SDCLK I2SSDO
+ * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,
+ * -------------------------------------------------------------------------------------------------------
+ * Ports : GPE3 GPE2 GPE1 GPE0
+ * Signal : I2SSDI CDCLK I2SSCLK I2SLRCK
+ * Binary : 10 10 , 10 10
+ */
+ rGPECON = 0xAAAAAAAA;
+ rGPEUP = 0x0000FFFF;
+ /*
+ * === PORT F GROUP
+ * Ports : GPF7 GPF6 GPF5 GPF4 GPF3 GPF2 GPF1 GPF0
+ * Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
+ * Setting: Output Output Output Output EINT3 EINT2 EINT1 EINT0
+ * Binary : 01 01 , 01 01 , 10 10 , 10 10
+ */
+ rGPFCON = 0x0000AAAA;
+ rGPFUP = 0x000000FF;
+
+ /*
+ * === PORT G GROUP
+ * Ports : GPG15 GPG14 GPG13 GPG12 GPG11 GPG10 GPG9 GPG8 GPG7 GPG6
+ * Signal : nYPON YMON nXPON XMON EINT19 DMAMODE1 DMAMODE0 DMASTART KBDSPICLK KBDSPIMOSI
+ * Setting: nYPON YMON nXPON XMON EINT19 Output Output Output SPICLK1 SPIMOSI1
+ * Binary : 11 11 , 11 11 , 10 01 , 01 01 , 11 11
+ * -----------------------------------------------------------------------------------------
+ * Ports : GPG5 GPG4 GPG3 GPG2 GPG1 GPG0
+ * Signal : KBDSPIMISO LCD_PWREN EINT11 nSS_SPI IRQ_LAN IRQ_PCMCIA
+ * Setting: SPIMISO1 LCD_PWRDN EINT11 nSS0 EINT9 EINT8
+ * Binary : 11 11 , 10 11 , 10 10
+ */
+ rGPGCON = 0x02A9FE5A;
+ rGPGUP = 0x0000FFFF;
+
+ /*
+ * === PORT H GROUP
+ * Ports : GPH10 GPH9 GPH8 GPH7 GPH6 GPH5 GPH4 GPH3 GPH2 GPH1 GPH0
+ * Signal : CLKOUT1 CLKOUT0 UCLK RXD2 TXD2 RXD1 TXD1 RXD0 TXD0 nRTS0 nCTS0
+ * Binary : 10 , 10 10 , 11 11 , 10 10 , 10 10 , 10 10
+ */
+ /* pulldown on GPH08: UEXTCLK, just floats!
+ * pulldown GPH0 -- nCTS0 / RTS_MODEM -- floats when GSM off
+ * pulldown GPH3 -- RXD[0] / TX_MODEM -- floats when GSM off
+ */
+ rGPHCON = 0x0019A0AA;
+ rGPHUP = 0x000007FF;
+
+ /* pulldown on GPJ00: input, just floats! */
+ /* pulldown on GPJ07: WLAN module WLAN_GPIO0, no ext pull */
+ rGPJCON = 0x02AAAAAA;
+ rGPJUP = 0x1FFFF;
+
+ /*
+ * We have to talk to the PMU a little bit
+ */
+
+ /* We need SD Card rail (HCLDO) at 3.0V */
+ i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOOUT,
+ 21);
+
+ /* switch HCLDO on */
+ i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOENA, 1);
+
+ /* push DOWN1 (CPU Core rail) to 1.7V, allowing 533MHz */
+ i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
+ 0x2b);
+#endif
+
+}
+
+/**
+ * returns PCB revision information in b0, d8, d9
+ * GTA03 EVB returns 0x000
+ * GTA03 returns 0x001
+ */
+
+int gta03_get_pcb_revision(void)
+{
+ return 0; /* always SMDK right now */
+}
+
+const struct board_variant const * get_board_variant_gta03(void)
+{
+ return &board_variants[gta03_get_pcb_revision()];
+}
+
+int is_this_board_gta03(void)
+{
+ /* FIXME: find something gta03 specific */
+ return 1;
+}
+
+static void putc_gta03(char c)
+{
+ serial_putc_s3c64xx(GTA03_DEBUG_UART, c);
+}
+
+int sd_card_init_gta03(void)
+{
+ extern int s3c6410_mmc_init(int verbose);
+
+ return s3c6410_mmc_init(1);
+}
+
+int sd_card_block_read_gta03(unsigned char * buf, unsigned long start512,
+ int blocks512)
+{
+unsigned long s3c6410_mmc_bread(int dev_num, unsigned long blknr, unsigned long blkcnt,
+ void *dst);
+
+ return s3c6410_mmc_bread(0, start512, blocks512, buf);
+}
+
+/*
+ * our API for bootloader on this machine
+ */
+const struct board_api board_api_gta03 = {
+ .name = "GTA03",
+ .linux_machine_id = 1626 /*1866*/,
+ .linux_mem_start = 0x50000000,
+ .linux_mem_size = (128 * 1024 * 1024),
+ .linux_tag_placement = 0x50000000 + 0x100,
+ .get_board_variant = get_board_variant_gta03,
+ .is_this_board = is_this_board_gta03,
+ .port_init = port_init_gta03,
+ .putc = putc_gta03,
+ .kernel_source = {
+ [0] = {
+ .name = "SD Card rootfs",
+ .block_read = sd_card_block_read_gta03,
+ .filesystem = FS_EXT2,
+ .partition_index = 2,
+ .filepath = "boot/uImage.bin",
+ .initramfs_filepath = "boot/initramfs.gz",
+ .commandline = "console=ttySAC0,115200 " \
+ "loglevel=8 init=/bin/sh root=/dev/ram ramdisk_size=6000000"
+ },
+ [1] = {
+ .name = "SD Card backup rootfs",
+ .block_read = sd_card_block_read_gta03,
+ .filesystem = FS_EXT2,
+ .partition_index = 3,
+ .filepath = "boot/uImage.bin",
+ .initramfs_filepath = "boot/initramfs.gz",
+ .commandline = "console=ttySAC0,115200 " \
+ "loglevel=8 init=/bin/sh "
+ }, },
+};
+
diff --git a/src/cpu/s3c6410/qi.lds b/src/cpu/s3c6410/qi.lds
index dbc9aa8..d148c86 100644
--- a/src/cpu/s3c6410/qi.lds
+++ b/src/cpu/s3c6410/qi.lds
@@ -45,7 +45,7 @@ SECTIONS
src/cpu/s3c6410/start.o (.text .rodata* .data)
src/cpu/s3c6410/start_qi.o (.text .rodata* .data)
src/cpu/s3c6410/serial-s3c64xx.o (.text .rodata* .data)
- src/cpu/s3c6410/tla01.o (.text .rodata* .data)
+ src/cpu/s3c6410/gta03.o (.text .rodata* .data)
src/cpu/s3c6410/hs_mmc.o (.text .rodata* .data)
src/utils.o (.text .rodata* .data)
src/ctype.o (.text .rodata* .data)
diff --git a/src/cpu/s3c6410/start_qi.c b/src/cpu/s3c6410/start_qi.c
index 664b378..a12a512 100644
--- a/src/cpu/s3c6410/start_qi.c
+++ b/src/cpu/s3c6410/start_qi.c
@@ -25,7 +25,7 @@
#include <qi.h>
-#include <neo_tla01.h>
+#include <neo_gta03.h>
#define stringify2(s) stringify1(s)
#define stringify1(s) #s
@@ -33,7 +33,7 @@
extern void bootloader_second_phase(void);
const struct board_api *boards[] = {
- &board_api_tla01,
+ &board_api_gta03,
NULL /* always last */
};
diff --git a/src/cpu/s3c6410/tla01.c b/src/cpu/s3c6410/tla01.c
deleted file mode 100644
index e53e6bd..0000000
--- a/src/cpu/s3c6410/tla01.c
+++ /dev/null
@@ -1,220 +0,0 @@
-#include <qi.h>
-#include <neo_tla01.h>
-#include <serial-s3c64xx.h>
-//#include <ports-s3c24xx.h>
-//#include <i2c-bitbang-s3c24xx.h>
-#include <pcf50633.h>
-
-#define GTA03_DEBUG_UART 0
-
-#define PCF50633_I2C_ADS 0x73
-
-
-static const struct board_variant board_variants[] = {
- [0] = {
- .name = "SMDK",
- .machine_revision = 0x010,
- },
-};
-
-void port_init_tla01(void)
-{
-#if 0
- unsigned int * MPLLCON = (unsigned int *)0x4c000004;
- unsigned int * UPLLCON = (unsigned int *)0x4c000008;
- unsigned int * CLKDIVN = (unsigned int *)0x4c000014;
-
- //CAUTION:Follow the configuration order for setting the ports.
- // 1) setting value(GPnDAT)
- // 2) setting control register (GPnCON)
- // 3) configure pull-up resistor(GPnUP)
-
- /* 32bit data bus configuration */
- /*
- * === PORT A GROUP
- * Ports : GPA22 GPA21 GPA20 GPA19 GPA18 GPA17 GPA16 GPA15 GPA14 GPA13 GPA12
- * Signal : nFCE nRSTOUT nFRE nFWE ALE CLE nGCS5 nGCS4 nGCS3 nGCS2 nGCS1
- * Binary : 1 1 1 , 1 1 1 1 , 1 1 1 1
- * Ports : GPA11 GPA10 GPA9 GPA8 GPA7 GPA6 GPA5 GPA4 GPA3 GPA2 GPA1 GPA0
- * Signal : ADDR26 ADDR25 ADDR24 ADDR23 ADDR22 ADDR21 ADDR20 ADDR19 ADDR18 ADDR17 ADDR16 ADDR0
- * Binary : 1 1 1 1 , 1 1 1 1 , 1 1 1 1
- */
- rGPACON = 0x007F8FFF;
- /*
- * ===* PORT B GROUP
- * Ports : GPB10 GPB9 GPB8 GPB7 GPB6 GPB5 GPB4 GPB3 GPB2 GPB1 GPB0
- * Signal : nXDREQ0 nXDACK0 nXDREQ1 nXDACK1 nSS_KBD nDIS_OFF L3CLOCK L3DATA L3MODE nIrDATXDEN Keyboard
- * Setting: INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
- * Binary : 00 , 01 00 , 01 00 , 01 01 , 01 01 , 01 01
- */
- rGPBCON = 0x00145554;
- rGPBDAT |= (1 <<9 ); /* USB_PULLUP */
- rGPBUP = 0x000007FF;
- /*
- * === PORT C GROUP
- * Ports : GPC15 GPC14 GPC13 GPC12 GPC11 GPC10 GPC9 GPC8 GPC7 GPC6 GPC5 GPC4 GPC3 GPC2 GPC1 GPC0
- * Signal : VD7 VD6 VD5 VD4 VD3 VD2 VD1 VD0 LCDVF2 LCDVF1 LCDVF0 VM VFRAME VLINE VCLK LEND
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10
- */
- rGPCCON = 0xAAA776E9;
- rGPCUP = 0x0000FFFF;
- rGPCDAT |= (1 << 9); /* WLAN_nRESET pull high */
- /*
- * === PORT D GROUP
- * Ports : GPD15 GPD14 GPD13 GPD12 GPD11 GPD10 GPD9 GPD8 GPD7 GPD6 GPD5 GPD4 GPD3 GPD2 GPD1 GPD0
- * Signal : VD23 VD22 VD21 VD20 VD19 VD18 VD17 VD16 VD15 VD14 VD13 VD12 VD11 VD10 VD9 VD8
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,10 10
- */
- rGPDCON = 0xAAA0AAA5;
- rGPDUP = 0x0000FFFF;
- /*
- * === PORT E GROUP
- * Ports : GPE15 GPE14 GPE13 GPE12 GPE11 GPE10 GPE9 GPE8 GPE7 GPE6 GPE5 GPE4
- * Signal : IICSDA IICSCL SPICLK SPIMOSI SPIMISO SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDCMD SDCLK I2SSDO
- * Binary : 10 10 , 10 10 , 10 10 , 10 10 , 10 10 , 10 10 ,
- * -------------------------------------------------------------------------------------------------------
- * Ports : GPE3 GPE2 GPE1 GPE0
- * Signal : I2SSDI CDCLK I2SSCLK I2SLRCK
- * Binary : 10 10 , 10 10
- */
- rGPECON = 0xAAAAAAAA;
- rGPEUP = 0x0000FFFF;
- /*
- * === PORT F GROUP
- * Ports : GPF7 GPF6 GPF5 GPF4 GPF3 GPF2 GPF1 GPF0
- * Signal : nLED_8 nLED_4 nLED_2 nLED_1 nIRQ_PCMCIA EINT2 KBDINT EINT0
- * Setting: Output Output Output Output EINT3 EINT2 EINT1 EINT0
- * Binary : 01 01 , 01 01 , 10 10 , 10 10
- */
- rGPFCON = 0x0000AAAA;
- rGPFUP = 0x000000FF;
-
- /*
- * === PORT G GROUP
- * Ports : GPG15 GPG14 GPG13 GPG12 GPG11 GPG10 GPG9 GPG8 GPG7 GPG6
- * Signal : nYPON YMON nXPON XMON EINT19 DMAMODE1 DMAMODE0 DMASTART KBDSPICLK KBDSPIMOSI
- * Setting: nYPON YMON nXPON XMON EINT19 Output Output Output SPICLK1 SPIMOSI1
- * Binary : 11 11 , 11 11 , 10 01 , 01 01 , 11 11
- * -----------------------------------------------------------------------------------------
- * Ports : GPG5 GPG4 GPG3 GPG2 GPG1 GPG0
- * Signal : KBDSPIMISO LCD_PWREN EINT11 nSS_SPI IRQ_LAN IRQ_PCMCIA
- * Setting: SPIMISO1 LCD_PWRDN EINT11 nSS0 EINT9 EINT8
- * Binary : 11 11 , 10 11 , 10 10
- */
- rGPGCON = 0x02A9FE5A;
- rGPGUP = 0x0000FFFF;
-
- /*
- * === PORT H GROUP
- * Ports : GPH10 GPH9 GPH8 GPH7 GPH6 GPH5 GPH4 GPH3 GPH2 GPH1 GPH0
- * Signal : CLKOUT1 CLKOUT0 UCLK RXD2 TXD2 RXD1 TXD1 RXD0 TXD0 nRTS0 nCTS0
- * Binary : 10 , 10 10 , 11 11 , 10 10 , 10 10 , 10 10
- */
- /* pulldown on GPH08: UEXTCLK, just floats!
- * pulldown GPH0 -- nCTS0 / RTS_MODEM -- floats when GSM off
- * pulldown GPH3 -- RXD[0] / TX_MODEM -- floats when GSM off
- */
- rGPHCON = 0x0019A0AA;
- rGPHUP = 0x000007FF;
-
- /* pulldown on GPJ00: input, just floats! */
- /* pulldown on GPJ07: WLAN module WLAN_GPIO0, no ext pull */
- rGPJCON = 0x02AAAAAA;
- rGPJUP = 0x1FFFF;
-
- /*
- * We have to talk to the PMU a little bit
- */
-
- /* We need SD Card rail (HCLDO) at 3.0V */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOOUT,
- 21);
-
- /* switch HCLDO on */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_HCLDOENA, 1);
-
- /* push DOWN1 (CPU Core rail) to 1.7V, allowing 533MHz */
- i2c_write_sync(&bb_s3c24xx, PCF50633_I2C_ADS, PCF50633_REG_DOWN1OUT,
- 0x2b);
-#endif
-
-}
-
-/**
- * returns PCB revision information in b0, d8, d9
- * GTA03 EVB returns 0x000
- * GTA03 returns 0x001
- */
-
-int tla01_get_pcb_revision(void)
-{
- return 0;
-}
-
-const struct board_variant const * get_board_variant_tla01(void)
-{
- return &board_variants[tla01_get_pcb_revision()];
-}
-
-int is_this_board_tla01(void)
-{
- /* FIXME: find something tla01 specific */
- return 1;
-}
-
-static void putc_tla01(char c)
-{
- serial_putc_s3c64xx(GTA03_DEBUG_UART, c);
-}
-
-int sd_card_init_tla01(void)
-{
- extern int s3c6410_mmc_init(int verbose);
-
- return s3c6410_mmc_init(1);
-}
-
-int sd_card_block_read_tla01(unsigned char * buf, unsigned long start512,
- int blocks512)
-{
-unsigned long s3c6410_mmc_bread(int dev_num, unsigned long blknr, unsigned long blkcnt,
- void *dst);
-
- return s3c6410_mmc_bread(0, start512, blocks512, buf);
-}
-
-/*
- * our API for bootloader on this machine
- */
-const struct board_api board_api_tla01 = {
- .name = "TLA01",
- .linux_machine_id = 1626 /*1866*/,
- .linux_mem_start = 0x50000000,
- .linux_mem_size = (128 * 1024 * 1024),
- .linux_tag_placement = 0x50000000 + 0x100,
- .get_board_variant = get_board_variant_tla01,
- .is_this_board = is_this_board_tla01,
- .port_init = port_init_tla01,
- .putc = putc_tla01,
- .kernel_source = {
- [0] = {
- .name = "SD Card rootfs",
- .block_read = sd_card_block_read_tla01,
- .filesystem = FS_EXT2,
- .partition_index = 2,
- .filepath = "boot/uImage.bin",
- .initramfs_filepath = "boot/initramfs.gz",
- .commandline = "console=ttySAC0,115200 " \
- "loglevel=8 init=/bin/sh root=/dev/ram ramdisk_size=6000000"
- },
- [1] = {
- .name = "SD Card backup rootfs",
- .block_read = sd_card_block_read_tla01,
- .filesystem = FS_EXT2,
- .partition_index = 3,
- .filepath = "boot/uImage.bin",
- .initramfs_filepath = "boot/initramfs.gz",
- .commandline = "console=ttySAC0,115200 " \
- "loglevel=8 init=/bin/sh "
- }, },
-};
More information about the openmoko-kernel
mailing list