GTA02 AR6k - not there!?
Nils Faerber
nils.faerber at kernelconcepts.de
Fri Apr 3 18:21:38 CEST 2009
Werner Almesberger schrieb:
> Nils Faerber wrote:
>> I am up-to-date on andy-tracking, if this is what you need to know.
> Yup, thanks.
>
>> echo "s3c2440-sdi" > /sys/bus/platform/drivers/s3c2440-sdi/bind
>
> Hmm, this is with modules but otherwise the same:
>
> con:~# insmod s3cmci.ko
> [21474595.185000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
> [...]
> con:~# insmod ar6000.ko
> [...]
> [21474598.425000] AR6000 Reg Code = 0x40000060
> con:~# iwconfig
> [...]
> eth0 AR6000 802.11g ESSID:""
> [...]
> con:~# echo s3c2440-sdi >/sys/bus/platform/drivers/s3c2440-sdi/unbind
> [21474608.405000] mmc1: card 0001 removed
> [...]
> con:~# iwconfig eth0
> eth0 No such device
Uh, that's weird.
My last messages from dmesg show:
[ 74.835000] mmc1: new SDIO card at address 0001
[ 75.870000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[ 75.870000] eth0 (sdio_ar6000): not using net_device_ops yet
[ 75.935000] AR6000 Reg Code = 0x40000060
[ 185.035000] mmc1: card 0001 removed
[ 185.095000] ar6000_wow interrupt
[ 185.240000] s3c2440-sdi s3c2440-sdi: powered down.
[ 185.240000] s3c2440-sdi s3c2440-sdi: powered down.
and eth0 still being present.
PS: How do I enable the S3C OHCI USB host for Bluetooth? Here I can PM
enable the BT module but it does not show up as USB device and
/proc/bus/usb/ is empty altogther (but mounted) - seems to me the s3c
ohci is not fully up yet... the only USB message I see is
[21474537.435000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[21474537.435000] ohci_hcd: block sizes: ed 64 td 64
and the usb gadget messages of course...
> - Werner
Cheers
nils faerber
--
kernel concepts GbR Tel: +49-271-771091-12
Sieghuetter Hauptweg 48 Fax: +49-271-771091-19
D-57072 Siegen Mob: +49-176-21024535
http://www.kernelconcepts.de
More information about the openmoko-kernel
mailing list