[Qi] bad magic when booting from NAND

Dmitry Kurochkin dmitry.kurochkin at gmail.com
Wed Apr 8 08:46:55 CEST 2009


On Wed, Apr 8, 2009 at 10:40 AM, Michael Trimarchi
<trimarchi at gandalf.sssup.it> wrote:
> Dmitry Kurochkin wrote:
>>
>> I did some more tests.
>>
>> When I do build unmodified qi, flash the image, it runs fine.
>>
>> But if I insert a single puts() line in src/cpu/s3c2442/start_qi.c :
>> start_qi, just after qi info is printed and before
>> bootloader_second_phase is called, it hangs and prints Ts.
>>
>
> Two things. You are not in stepping stone size

How can I check this?

> or just you don't have
> register
> what function must use puts. set_putc_func.

I add puts right after other puts that print the qi header. And it
goes after set_putc_func.

Regards,
  Dmitry

> Michael
>



More information about the openmoko-kernel mailing list