Does Gta03-kernel (linux 2.6.24) not support S3C6400 ?

tommy.hong hongjiujing at 126.com
Thu Feb 5 09:45:59 CET 2009


Hi,all! I compile a kernel zImage for S3C6400 ,but stop when decompress finished!Kernel source is openmoko gta03-kernel BSP!

Starting kernel ... 
 
Uncompressing Linux............................................................. 
............................................................................... 
............................................................................... 
................................................................ done, booting 
the kernel 

I hope you can help me ,thanks !


 I search this error from google ,anyone say the following!
"

I had interacted with you about porting Android in smdk6400 and
found your suggestions useful. I have gone through your recent posting
>> > >> >  and
>> > >> > found that you have successfully ported the kernel and file system
>> > >> > onto the board.Congratulations.
>>
>> > >> > In our porting affort, I am facing the issue that zimage does not
>> > >> > boot
>> > >> > where as image starts booting. I checked   through zImage booting
>> > >> > sequence and found that  arch/arm/boot/head.S is the first file
>> > >> > which
>> > >> > gets executed. This file has ATAG structure (which I guess is for
>> > >> > passing parameters from boot loader to the kernel). I am using the
>> > >> > 2.6.23 kernel and bootloader is uboot 1.1.6. I suspect the problem
>> > >> > is
>> > >> > with uboot configuration (which was built to handle kernel version
>> > >> > 2.6.21 was not handling ATAG though uboot 1.1.1 has support for
>> > >> > ATAG) . Please let me know if this thinking is correct and your
>> > >> > suggestions on sorting out the problem.
>>
"


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/openmoko-kernel/attachments/20090205/4ab8e3a0/attachment.htm 


More information about the openmoko-kernel mailing list