[PATCH 2/4] pcf50633: properly reenable charging when the supply conditions change

[Paul Fertser]

If chgmod == BATFULL, setting chgena has no effect. Datasheet says we
need to set resume instead but when autoresume is used resume doesn't
work. Clear and set chgena instead.

This enables a user to force charging by re-plugging USB even when the
charger entered Battery Full mode, might be handy before a long trip.

Signed-off-by: Paul Fertser <fercerpav at gmail.com>
---
 drivers/power/pcf50633-charger.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index cda0c67..5b5fe80 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -90,14 +90,18 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
 	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
 
 	/* If chgmod == BATFULL, setting chgena has no effect.
-	 * We need to set resume instead.
+	 * Datasheet says we need to set resume instead but when autoresume is
+	 * used resume doesn't work. Clear and set chgena instead.
 	 */
 	if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
 		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
 				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
-	else
+	else {
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
+				PCF50633_MBCC1_CHGENA);
 		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
+				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+	}
 
 	mbc->usb_active = charging_start;
 	
-- 
1.6.0.6