[android] no usb connexion with QI

[Stefan Fröbe]

On Fri, Mar 6, 2009 at 1:10 AM, Cédric Berger <cedric.berger74 at gmail.com>wrote:

> On Thu, Mar 5, 2009 at 22:16, Cédric Berger <cedric.berger74 at gmail.com>
> wrote:
> > On Thu, Mar 5, 2009 at 22:05, Stefan Fröbe <frobiac at googlemail.com>
> wrote:
> >> recently, so using eth2 works !
> >>
> >> Stefan
> >>
> >
> > I got
> > [ 8417.016133] usb 5-1: new full speed USB device using uhci_hcd and
> address 20
> > [ 8417.230625] usb 5-1: configuration #1 chosen from 2 choices
> > [ 8417.262059] eth2: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC
> > Ethernet Device, 00:1f:11:01:0d:1d
> >
>
>
> So yes, copying my usb0 config (in /etc/network/interfaces ) on my pc
> for eth2, it works !
> Thanks Stefan !
>
> But I do not understand where this change come from ?!
> And why it is now eth2 with Qi and usb0 with u-boot .....


On Ubuntu 8.04, I found the solution in
/etc/udev/rules.d/70-persistent-net.rules where the following line needed to
be changed to usb0 at the end ( with correct MAC, of course ):

 # USB device 0x1457:0x5122 (cdc_ether)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:1f:11:01:05:80", ATTR{type}=="1", KERNEL=="eth*",
NAME="usb0"

After udev restart, I got back usb0 on FR insertion

Stefan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/openmoko-kernel/attachments/20090306/b1a8a24a/attachment.htm