AR6000 netif_queue_stop non stop, Bug?

[Ivan Petrov]

Sorry, forget attachment.

> Dear Dongas,
>
>> It's very kind of you.
>> Really appreciate for you reply. :)
>>
>> 2009/3/28 Ivan Petrov <ivan_p at hotbox.ru>:
>>>> Dear Ivan,
>>>>
>>>> Can you help tell that which SDIO WiFi card are you using?
>>>> Are you using Openmoko's ar6000 driver in Andy-tracking branch in kernel
>>>> 2.6.29?
>>>
>>> Card - Silex SX-SDAWG. Drivers based on OpenMokko branch, but with small
>>> patches.
>>
>> I'm also using Silex SX-SDWAG with driver based on OpenMoko
>> Andy-tracking branch in kernel 2.6.29.
>> But i havn't got any small patches.
>
>> Does it mean that the ar6000 driver from Openmoko can not work for
>> SX-SDWAG by default, need some extra patches?
> No no, SX-SDWAG work with AR6000 Openmoko dirvers,
> 1) driver have GPIO ussage on HIF layer, but on AT91 it not work.
> 2) I have myself HIF levele module, and now I try merge it with OpenMoko driver. I send old module to Werner as sample, posible he 
> can find inside any useful part.
> 3) AT91 have small bugs...
>
>> Can you help tell me that where can i get these special patches?
> 1, 2 - I attach full experemental snapshot (diff with orig kernel), apply it to clean kernel, driver have different path with 
> OpenMoko.
> 3 - about bugs...
>
> AT91SAM9260 not correctly work with SDIO_IRQ in 4wire mode.
> For solve:
> 1. Turn off 4wire mode in EK BOARD file, or try switch it on HIF layer (atm I not arrive)
>
> +/*
> + * MCI (SD/MMC)
> + */
> +static struct at91_mmc_data __initdata board_mmc_data = {
> + .slot_b  = 0, // port A on my board
> + .wire4  = 0, // wire1 mode
> +// .det_pin = ... not connected
> +// .wp_pin  = ... not connected
> +// .vcc_pin = ... not connected
> +};
>
> 2. Disable SDIO_IRQ in host controller, and increase jifies HZ form 100 to 1000 in Linux config
>
> ==================
> CONFIG_AT91_TIMER_HZ=1000
>
> ==================
> diff -urN linux-2.6.28.8.orig/drivers/mmc/host/at91_mci.c
> linux-2.6.28.8/drivers/mmc/host/at91_mci.c
> --- linux-2.6.28.8.orig/drivers/mmc/host/at91_mci.c 2009-03-17
> 03:50:03.000000000 +0300
> +++ linux-2.6.28.8/drivers/mmc/host/at91_mci.c 2009-03-22 01:08:53.000000000
> +0300
> @@ -1007,7 +1007,7 @@
>  mmc->f_min = 375000;
>  mmc->f_max = 25000000;
>  mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> - mmc->caps = MMC_CAP_SDIO_IRQ;
> + mmc->caps = 0; // MMC_CAP_SDIO_IRQ;
>
>  mmc->max_blk_size = 4095;
>  mmc->max_blk_count = mmc->max_req_size;
> ==================
>
> And more... Please insert card to slot before board power ON. Hotplug i not test, but after reset (not power off/on) my card not 
> work.
>
>> In addition , which firmware are your card based?
>> My card is based on firmware 2.0 since Werner told me that the ar6000
>> driver of Openmoko is only for firmware 2.0 card.
> equally.
>
>> My board is based on ARM926 core.
> ARM926 or AT91SAM9260? however it is not important.
>
> --
> Regards, Ivan
>
>
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 102_ar6000_driver.patch.gz
Type: application/x-gzip
Size: 225106 bytes
Desc: not available
Url : http://lists.openmoko.org/pipermail/openmoko-kernel/attachments/20090329/f4e9c25c/attachment-0001.bin