Can't Boot Qtopia from microSD

Olivier Berger oberger at ouvaton.org
Sat Aug 9 07:30:30 CEST 2008


"Matthew McCormick" <matthew.m.mccormick at gmail.com> writes:

> On Wed, Aug 6, 2008 at 8:33 AM, Matthew McCormick <
> matthew.m.mccormick at gmail.com> wrote:
>
>> Brian C <brianwc at ...> writes:
>>
>> >
>> > 2. partition2 is where I want to put Qtopia.
>> > After formatting it ext2 and mounting the partition, I did:
>> > wget
>> http://qtopia.net/downloads/neo/qtopia-4.3.2-gta02-flash-07221045.tgz
>> > tar zvxf qtopia-4.3.2-gta02-flash-07221045.tgz
>> > mv uImage*.bin uImage.bin
>> >
>> > I changed the kernel name based on something I read stating it had to be
>> > called uImage.bin (is that wrong?)
>> >
>>
>> You must follow the instructions on the wiki.  You did not extract the
>> rootfs.
>>
>>
> BTW, the page should be looking at is here
> http://wiki.openmoko.org/wiki/Qtopia
>

Well... I guess there's also
http://wiki.openmoko.org/wiki/Booting_from_SD which may need to be
edited with all these instructions too (or pointing to the right ones ?)

My 2 cents,

-- 
Olivier BERGER 
(OpenPGP: 1024D/B4C5F37F)
http://www.olivierberger.com/weblog/




More information about the support mailing list