can't connect a usb-pen to the neo freerunner

[Thomas Bertani]

2008/8/31 polz <polz at aufbix.org>

> On Sunday 31 August 2008 08:38:01 Thomas Bertani wrote:
> > Hi, I connected an usb pen to the usb port of the freerunner but when I
> > plug it in, nothing appends. How can I mount it manually? I can't find
> the
> > device name...
> Is the port in host mode ? What does dmesg say when you insert the pen ?
>

yes, I typed

echo "host" > /sys/devices/platform/s3c2410-ohci/usb_mode


and then

echo "1" > /sys/devices/platform/neo1973-pm-host.0/hostmode

when I connect the usb pen dmesg says

[ 1401.730000] usb 1-2: new full speed USB device using s3c2410-ohci and
address 91
[ 1401.935000] usb 1-2: configuration #1 chosen from 1 choice
[ 1403.085000] SCSI subsystem initialized
[ 1403.305000] Initializing USB Mass Storage driver...
[ 1403.340000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1403.360000] usbcore: registered new interface driver usb-storage
[ 1403.360000] usb-storage: device found at 91
[ 1403.365000] USB Mass Storage support registered.
[ 1403.370000] usb-storage: waiting for device to settle before scanning
[ 1408.380000] usb-storage: device scan complete
[ 1408.440000] scsi 0:0:0:0: Direct-Access     TDK      TDK Trans-it
PMAP PQ: 0 ANSI: 0 CCS






now i'm trying to configure my huawei e270 modem :D
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080831/db3575f3/attachment.htm