Normal Freerunner boot problem...

[Leonti Bielski]

Hello!
Did you try to reflash your firmware?
If not here is a good guide how to do it. It is also possible to
reflash your phone from Windows:
http://wiki.openmoko.org/wiki/Flashing_the_Neo_FreeRunner.

I think your phone is just not flashed, or last flashing went wrong.
Leonti

On Sat, Dec 6, 2008 at 12:58 AM, Peter OConnor <poconnor at gmail.com> wrote:
> My NOR and NAND images seem fine.  I first thought that my NAND was messed
> up.  Here is the problem.
>
> Freerunner, GTA02v5 or 6, the date code on the phone is 6/20/2008
>
> - CAN NOT boot with Power button only - (see image).
> - can boot up the NAND boot loader
> - CAN NOT boot from the NAND boot option - (see image)
> - can boot NOR boot loader.
> - can boot kernel with NOR boot menu option
>
> The NAND boot error reads:
> -------------------------------------------------------------------------------------
> NAND read: mtdparts variable not set, see 'help mtdparts'
> incorrect device type in kernel
> 'kernel' is not a number
> Wrong Image Format for bootm command
> ERROR: can't get kernel image!
> -------------------------------------------------------------------------------------
>
> I am assuming that the Power button problem is the same as the NAND boot.
>
> Any help with instructions will help.  Also, I am primarily a windows user,
> please don't throw stones, but I will try my best if the only solution is to
> fix it from Linux.
>
>
> --
> Peter O'Connor
> poconnor at gmail.com
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
>