connecting to debug board v3
Nelson Castillo
nelsoneci at gmail.com
Fri Nov 7 14:12:35 CET 2008
> It's /dev/ttyUSB0. There are no others:
>
> $ ls /dev/ttyU*
> /dev/ttyUSB0
I see. I get 0 and 1 after I run:
modprobe ftdi_sio vendor=0x1457 product=0x5118
ftdi_sio 3-1.1:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT2232C
usb 3-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 3-1.1:1.1: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT2232C
usb 3-1.1: FTDI USB Serial Device converter now attached to ttyUSB1
> The board should accept 8N1 at 115200 bps, but appears not to even on systems besides Kubuntu or Debian:
I'm using Debian.
Regards,
Nelson.-
More information about the support
mailing list