Battery killed?

[Paul]

Have you tried doing Nor Boot with the battery in?

On Tue, Nov 11, 2008 at 9:07 PM, Joachim Ott <jo.omsl at googlemail.com> wrote:

> Looks like I have killed the battery of my gat02v6. While I was working on
> the PC and having the FR laying besides (running Om2007.2), I noticed the
> red LED flashing once in a second. I took out the battery because I couldn't
> reboot. I booted from flash (currently with the newest FSO), all looked
> normal. When the system was up, I plugged in USB, the screen went black and
> the red LED began flashing like above. I took out the battery, measured and
> it showed only 2.99V. Then I attached external power, booted Om2007.2 from
> SD card, when it was up I connected USB, removed external power and put in
> the battery - shortly after the screen went black bla bla rhabarbar...
>
> With the battery from the other FR (fully loaded, shows 4.35V) everything
> is fine again. Have I killed the battery by over-using the device? I boot
> about 10 times a day, from flash or SD, playing with GSM, GPS and WLAN. Is
> it possible to charge that battery ever again?
>
> This are the last messages before Om2007.2 died (the last try from above):
>
> Nov 12 02:00:36 om-gta02 user.info kernel: usb0: full speed config #1: 500
> mA, Ethernet Gadget, using CDC Ethernet
> Nov 12 02:00:36 om-gta02 user.err kernel: power_supply bat: driver failed
> to report `voltage_now' property
> Nov 12 02:00:37 om-gta02 user.err kernel: power_supply bat: driver failed
> to report `voltage_now' property
> Nov 12 02:00:37 om-gta02 user.info kernel: ADDRCONF(NETDEV_CHANGE): usb0:
> link becomes ready
> Nov 12 02:00:45 om-gta02 user.err kernel: power_supply bat: driver failed
> to report `voltage_now' property
> Nov 12 02:00:46 om-gta02 user.debug kernel: modem wakeup interrupt
> Nov 12 02:00:46 om-gta02 user.err kernel: power_supply bat: driver failed
> to report `voltage_now' property
> Nov 12 02:00:47 om-gta02 user.debug kernel: usb0: no IPv6 routers present
> Nov 12 02:01:37 om-gta02 user.warn kernel: AR6000 disconnected
> Nov 12 02:01:46 om-gta02 local0.info /usr/sbin/gsm0710muxd[1394]:
> gsm0710muxd.c:609:pseudo_device_read(): Logical channel 1 for (null) closed
> Nov 12 02:23:27 om-gta02 syslog.info syslogd started: BusyBox v1.11.1
> Nov 12 02:23:27 om-gta02 user.notice kernel: klogd started: BusyBox v1.11.1
> (2008-08-05 02:00:09 CEST)
> Nov 12 02:23:27 om-gta02 user.notice kernel: Linux version 2.6.24 (
> oe at buildhost.openmoko.org) (gcc version 4.1.2) #1 PREEMPT Thu Aug 28 01:48
>
> The "driver failed to report `voltage_now' property" is because at that
> time it was on external power. No messages were logged after I put in the
> battery.
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
>


-- 
Paul
Email - paultsai at gmail.com

There were moments when he looked on evil simply as a mode through which he
could realize his conception of the beautiful.
Oscar Wilde - The Picture of Dorian Gray
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20081111/355e1e02/attachment.htm