qtopia - kernel panic

[Ali]

Hi,
    This is the output of printenv on u-boot prompt.

=================================================================================
GTA02v5 # printenv
boot_menu_timeout=300
bootargs=roofstype=ext2 root=/dev/mmcblk0p2 console=tty0
console=ttySAC2,115200 loglevel=8
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
init=/etc/startup
bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200
console=tty0 loglevel=8 regular_boot
bootcmd=setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000
kernel 0x200000; bootm 0x32000000
bootdelay=1
menu_1=Boot from microSD (FAT+ext2): setenv bootargs ${bootargs_base}
rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts} init=/sbin/init
ro; mmcinit; fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
menu_2=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv
stderr usbtty
menu_3=Set console to serial: setenv stdin serial; setenv stdout serial;
setenv stderr serial
menu_4=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv
stderr usbtty
menu_5=Set console to serial: setenv stdin serial; setenv stdout serial;
setenv stderr serial
menu_6=Reboot: reset
menu_8=Power off: neo1973 power-off
mtdids=nor0=physmap-flash,nand0=neo1973-nand
mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
quiet=1
sd_image_name=uImage.bin
splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000 0x8800000
0x96000
stderr=usbtty
stdin=usbtty
stdout=usbtty
usbtty=cdc_acm
menu_9=Boot 200808 from microSD (FAT+ext3): setenv bootargs ${bootargs_base}
rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts}  ro; mmcinit;
fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
partition=nor0,0
mtddevnum=0
mtddevname=nor
pcb_rev=0x000
pcf50633_int1=0x80
pcf50633_int2=0xaa

Environment size: 1869/262140 bytes
GTA02v5 # 


================================================================================

I have tried both ext2 and ext3 setting .The kernel panic still persist.




Bernhard Schauer wrote:
> 
> Hi!
> 
> Could you please perform a printenv on your Freerunner in uboot and
> provide
> the output?
> 
> regards
> 
> 
> 
> 

-- 
View this message in context: http://n2.nabble.com/dialer-error-tp780706p796473.html
Sent from the Openmoko Support mailing list archive at Nabble.com.