qtopia - kernel panic

[Bernhard Schauer]

Hi Ali,

sorry for that delay, but I was on vacation last week. If this issue was not
solved, I'd suggest to enter the following on bootscreen:

setenv bootargs console=ttySAC2,115200 rootfstype=ext2 root=/dev/mmcblk0p2
rootdelay=5 ${mtdparts} init=/sbin/init ro
mmcinit
fatload mmc 1 0x32000000 ${sd_image_name}
bootm 0x32000000

you could copy paste it to USB console... If that still fails, please
provide the full panic message here

regards,

Bernhard

On Mon, Sep 1, 2008 at 6:01 AM, Ali <yaqoobali007 at gmail.com> wrote:

>
> Hi,
>    This is the output of printenv on u-boot prompt.
>
>
> =================================================================================
> GTA02v5 # printenv
> boot_menu_timeout=300
> bootargs=roofstype=ext2 root=/dev/mmcblk0p2 console=tty0
> console=ttySAC2,115200 loglevel=8
>
> mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
> init=/etc/startup
> bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200
> console=tty0 loglevel=8 regular_boot
> bootcmd=setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e
> 0x32000000
> kernel 0x200000; bootm 0x32000000
> bootdelay=1
> menu_1=Boot from microSD (FAT+ext2): setenv bootargs ${bootargs_base}
> rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts} init=/sbin/init
> ro; mmcinit; fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
> menu_2=Set console to USB: setenv stdin usbtty; setenv stdout usbtty;
> setenv
> stderr usbtty
> menu_3=Set console to serial: setenv stdin serial; setenv stdout serial;
> setenv stderr serial
> menu_4=Set console to USB: setenv stdin usbtty; setenv stdout usbtty;
> setenv
> stderr usbtty
> menu_5=Set console to serial: setenv stdin serial; setenv stdout serial;
> setenv stderr serial
> menu_6=Reboot: reset
> menu_8=Power off: neo1973 power-off
> mtdids=nor0=physmap-flash,nand0=neo1973-nand
>
> mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
> quiet=1
> sd_image_name=uImage.bin
> splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000
> 0x8800000
> 0x96000
> stderr=usbtty
> stdin=usbtty
> stdout=usbtty
> usbtty=cdc_acm
> menu_9=Boot 200808 from microSD (FAT+ext3): setenv bootargs
> ${bootargs_base}
> rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts}  ro; mmcinit;
> fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000
> partition=nor0,0
> mtddevnum=0
> mtddevname=nor
> pcb_rev=0x000
> pcf50633_int1=0x80
> pcf50633_int2=0xaa
>
> Environment size: 1869/262140 bytes
> GTA02v5 #
>
>
>
> ================================================================================
>
> I have tried both ext2 and ext3 setting .The kernel panic still persist.
>
>
>
>
> Bernhard Schauer wrote:
> >
> > Hi!
> >
> > Could you please perform a printenv on your Freerunner in uboot and
> > provide
> > the output?
> >
> > regards
> >
> >
> >
> >
>
> --
> View this message in context:
> http://n2.nabble.com/dialer-error-tp780706p796473.html
> Sent from the Openmoko Support mailing list archive at Nabble.com.
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080908/27d17a86/attachment.htm