What's wrong with gpsd

[Atilla Filiz]

These happened with FSO milestone 2 and 3
Case 1:I turn on GPS, start gpsd and start Tango gps. Even if I read the
NMEA stamps with "cat /dev/ttySAC1", TangoGPS still reports 0 satellites and
gps tome of 1 Jan 1970

Case 2:
Turn on GPS, start gpsd, run "xgps 192.168.0.202", and xgps hangs

Case 3:
Turn on GPS, instead of running gpsd, shovel NMEA using "nc 192.168.0.200 <
/dev/ttySAC1" and run gpsd on my PC, then xgps runs normally.

So something is definitely wrong with gpsd on FR. Am I the only one with
this?
-- 
---------------------------------------------------------
Bu mesaj UTF-8 ile kodlanmıştır
---------------------------------------------------------
Atilla Filiz
Technische Universiteit Eindhoven
Embedded Systems, Master's Programme
--------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080917/cbef72c0/attachment.htm