sd card?
Ali
alishams at interchange.ubc.ca
Tue Aug 18 22:36:23 CEST 2009
On Tue, 2009-08-18 at 12:11 -0700, Russell Dwiggins wrote:
> When I flashed the latest u-boot, I was able to boot again from an SD when I
> couldn't after receiving the device back from SDG. I assumed that somehow
> u-boot became corrupted. I don't think I've tried Qi since that time. I
> don't like it since I like to actively choose where I will boot at a given
> time. If you feel it will help, I can flash Qi and let you know if I still
> have access to the SD.
>
> Russell Dwiggins
Yea, i would really appreciate that. The version I flashed is
u-boot-gta02v5-1.3.1+gitr650149a53dbdd48bf6dfef90930c8ab182adb512-r1.bin
which seems to be the latest, But I am still getting the buffer i/o
problem. The exact error is:
[ 2489.550000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[ 2489.560000] mmcblk0: error -110 sending read/write command, response
0x0, card status 0x400b00
[ 2489.570000] end_request: I/O error, dev mmcblk0, sector 31
[ 2489.570000] Buffer I/O error on device mmcblk0, logical block 3
which is what others seem to have had. Also what version of u-boot did
you flash? I'm desperate so I'll try anything. Thanks :)
More information about the support
mailing list