[QT Extended Improved 20090316 snapbuild] cannot issue AT commands to modem
Joerg Reisenweber
joerg at openmoko.org
Wed Mar 18 18:47:07 CET 2009
Am Mi 18. März 2009 schrieb xChris:
>
> Hi,
>
> Using the socat - file:/dev/ttySAC0,crtscts,crnl,b115200 , I issue AT
> commands but I get no response!
> (i have the moko11 f/ware)
>
> Note that, when I am connected with the modem (via the socat), when I
> receive a call, I can see
> the messages of the modem... so I only cannot issue AT commands.
>
please note modem in standard setup has a 10sec timeout to power down serial
IF. This means after 10 sec the first command is swallowed to /dev/null and
you have to re-issue same command during the following 10sec activation time
you can change this with
AT%sleep=1
HTH
/j
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
Url : http://lists.openmoko.org/pipermail/support/attachments/20090318/e8990a86/attachment.pgp
More information about the support
mailing list