[OM2008.12] GSM modem resetting

[Stacy Millions]

Timo Juhani Lindfors wrote:
> Stacy Millions <slm3095om at Millions.Ca> writes:
>> I will put together a debug cable and see what trace data I can get from
>> the modem. Is there any setup that needs to be done to the modem to
>> enable the debug output or just plug in cable and go?
> 
> You need to run "gpio J6=0".

Perfect, thanks.

I built the debug cable, and ran my test again and captured the debug 
output from the modem. The sequence of events are as follows

- power on modem
- issue commands
- modem resets
- power off modem

====================
AT-Command Interpreter ready
AT+CGMR
+CGMR: "GSM: gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko11"

OK
AT%CSTAT=1;+CMEE=2;+CREG=2
OK
AT+CFUN=1
%CSTAT: PHB, 0
%CSTAT: PHB, 0
%CSTAT: PHB, 0
%CSTAT: PHB, 0

OK
AT+COPS=0,0
OK

+CREG: 2

+CREG: 5,"2710","C60E"
AT-Command Interpreter ready
====================

the debug log is available here:

http://www.millions.ca/~stacy/neoFreeRunner/gsm-debug-log-000

-stacy