disassembling the device?

[Rask Ingemann Lambertsen]

On Sat, May 02, 2009 at 03:43:24PM +0200, Dr. H. Nikolaus Schaller wrote:
> http://wiki.openmoko.org/wiki/Disassembling_Neo1973
> 
> It is the same for the Neo Freerunner

   As to the part about bending the side of the back cover away from the
headphone connector, I found that it works relatively easily if you insert a
small (1.6 mm) flat head screwdriver between the headphone connector and the
PCB retaining clip right next to it. To the other side of the headphone
connector is a white plastic spacer that you might damage if you insert the
screwdriver there. And when you lift the side of the PCB, check that the
Bluetooth module clears the battery compartment before you move the PCB
sideways.

-- 
Rask Ingemann Lambertsen
Danish law requires addresses in e-mail to be logged and stored for a year