microsSD doesn't mount any more!
tonyberth at googlemail.com
Mon Dec 8 14:24:53 CET 2008
On Mon, Dec 8, 2008 at 12:00 PM, Evgeny Karyakin
<anthropophagite at gmail.com>wrote:
> 2008/12/8 Tony Berth <tonyberth at googlemail.com>:
> >> On Fri, Dec 5, 2008 at 2:45 PM, Andy Green <andy at openmoko.com> wrote:
> >>> | [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8
> >>> Are there some glamo-mci errors floating around before that?
> > some more feedback:
> > I did format my card with 'http://www.sdcard.org/consumers/formatter/'
> > still doesn't work on FR. I get following dmesg:
> > [ 73.055000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
> > [ 73.055000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
> > [ 73.060000] mmcblk0: error -110 sending read/write command
> > [ 73.065000] end_request: I/O error, dev mmcblk0, sector 0
> > [ 73.065000] Buffer I/O error on device mmcblk0, logical block 0
> I suffered (and to some extent still suffering) with similar
> troubles and ended up completely "blank" SD card with "dd
> if=/dev/random of=/dev/mmcblk0" command, and then repartition it with
> fdisk as described in wiki. Also you can try slowing down glamo
> rate for SD access by getting some hints from, although the latter
> trick has to deal with another problem.
>  http://wiki.openmoko.org/wiki/Booting_from_SD#Partioning_the_SD_card
>  http://docs.openmoko.org/trac/ticket/1743#comment:4
just for the records, when I did another upgrade today with the latest
updates in the test repository, my card was picked-up by FR. So I think now
the problem (whatever it was!) should be regarded as solved.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community