Increasing GPS accuracy with EGNOS

[Joseph Reeves]

> Someone tell me what command to run on what distro and I'll let you all know...

Oh, and somebody write a SISNeT application too ;-)

http://www.egnos-pro.esa.int/sisnet/index.html



2009/10/5 Joseph Reeves <iknowjoseph at gmail.com>:
>>This is probably worth checking to see what is actually happening
> when in Europe,
>
> Someone tell me what command to run on what distro and I'll let you all know...
>
>
>
> 2009/10/5 Al Johnson <openmoko at mazikeen.demon.co.uk>:
>> On Sunday 04 October 2009, Erik Lundin wrote:
>>> Good news, indeed. Does the Neo FreeRunner support EGNOS signals? Both
>>> the hardware and software?
>>
>> http://www.u-blox.com/en/download-center.html?task=view.download&cid=83
>>
>> According to this the Antaris 4 is capable of using WAAS, EGNOS and MSAS,
>> collectively known as SBAS, and the signal is received through the GPS
>> antenna. By default it is enabled, with one search channel, although this can
>> be configured through the ubx protocol. The status can also be shown in ubx
>> messages. This is probably worth checking to see what is actually happening
>> when in Europe, as when it was written EGNOS was in test mode, and its use was
>> disabled by default. It is unclear whether this was because of a 'test mode'
>> flag in the signal or hardcoding in the firmware.
>>
>> _______________________________________________
>> Openmoko community mailing list
>> community at lists.openmoko.org
>> http://lists.openmoko.org/mailman/listinfo/community
>>
>