[GTA04] When is the next and more powerful openmoko releasing
infibit at gmail.com
Fri Oct 22 14:36:07 CEST 2010
Recommendations for better hardware on Openmoko.
1)A 600 Mhz processor is minimally required to run the OS at usable
speeds.An 800 Mhz processor would be good across all OSes.A 1Ghz processor
would be too costly
2)Please use ADXL335 accelerometer whose sensor output is better, less
noisy, smooth transition and will be better to develop applications.Also
please provide a direct access to ADC read from the processor and not a text
file dump and then read method.
3)A tilt compensation 1 axis or 3 axis magnetometer would be good.
With a better processor speed there is no turning back for Openmoko.
On Fri, Oct 22, 2010 at 12:46 AM, Alfa21 <freerunner at my.is.it> wrote:
> 2010-10-22 at 08:24 Dr. H. Nikolaus Schaller
> > So if we reduce precision of the case production process, the buttons
> > larger and finally, the phone is more a brick than a handheld phone :)
> > Personally, I am in favour of high-end high-quality design (like the
> > even if it costs money.
> I agree... but is 3d printing etc. just for prototypes or do you plan to
> use that also for the final product (with big volumes mass production)?
> I think 3d printing is ok only for the first case, to try also different
> shapes before but finalized to build the final and more precise mould.
> also I think a classic mould process is expensive just for small scales but
> for a mass production it's cheaper (on a single unit) and _faster_ than 3d
> and also it's more appealing to the eye of the final customer to see a
> smoth and higrade product.
> btw I think this is the really last step in the production process.
> by now imho it's more adequate to replace the current circuit board from
> our gta0x and eventually drill holes if you plan to add some different
> connector to the pcb (maybe a hdmi?) ;)
> ALFA21 IS PROVIDED "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR
> Openmoko community mailing list
> community at lists.openmoko.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community